Re: [PATCH] bcm2835: Add Raspberry Pi thermal sensor to the device tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 10/11/2015 01:48 PM, Lubomir Rintel wrote:
> Driven via the Raspberry Pi VideoCore 4 firmware interface.

>  .../bindings/thermal/raspberrypi,bcm2835-thermal.txt        | 13 +++++++++++++
>  arch/arm/boot/dts/bcm2835-rpi.dtsi                          |  5 +++++

There should be a separate patch for the DT binding and DT additions,
but they can be in a series. As before, CC at least the DT binding to
the DT binding maintainers.

> diff --git a/Documentation/devicetree/bindings/thermal/raspberrypi,bcm2835-thermal.txt b/Documentation/devicetree/bindings/thermal/raspberrypi,bcm2835-thermal.txt

> +Raspberry Pi Broadcom BCM2835 thermal control
> +
> +Required properties:

This needs some more explanation of what this is intended to represent
and do. For example, what services is this node (the driver instantiated
by this node) expected to implement, and what firmware services is it
expected to rely upon?
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux