On Sun, Oct 18, 2015 at 11:02 AM, Josh Cartwright <joshc@xxxxxx> wrote:
> Hey Moritz-
>
> On Fri, Oct 16, 2015 at 03:42:30PM -0700, Moritz Fischer wrote:
>> This commit adds FPGA Manager support for the Xilinx Zynq chip.
>> The code borrows some from the xdevcfg driver in Xilinx'
>> vendor tree.
>>
>> Signed-off-by: Moritz Fischer <moritz.fischer@xxxxxxxxx>
>> ---
>>
>> v2:
>> - Replaced locking error flag and broken completion with irq masking
>> and changed completion handling
>> - Dealing with timeout cases
>> - Reworked clock handling
>> - Moved initialization from probe() to write_init()
>> - Fixed return value of devm_request_irq() check to check for non-zero
>> - Alphabetized includes ;-)
>> - Changed some of the comments, to better explain what's happening
> [..]
>> +static int zynq_fpga_probe(struct platform_device *pdev)
>> +{
> [..]
>> + priv->clk = devm_clk_get(dev, "ref_clk");
>> + if (IS_ERR(priv->clk)) {
>> + dev_err(dev, "input clock not found");
>> + return PTR_ERR(priv->clk);
>> + }
>> +
>> + err = clk_prepare_enable(priv->clk);
>> + if (err) {
>> + dev_err(dev, "unable to enable clock");
>> + return err;
>> + }
>
> prepare_cnt = 1, enable_cnt = 1
>
>> +
>> + /* unlock the device */
>> + zynq_fpga_write(priv, UNLOCK_OFFSET, UNLOCK_MASK);
>> +
>> + clk_disable(priv->clk);
>
> prepare_cnt = 1, enable_cnt = 0
>> +
>> + err = fpga_mgr_register(dev, "Xilinx Zynq FPGA Manager",
>> + &zynq_fpga_ops, priv);
>> + if (err) {
>> + dev_err(dev, "unable to register FPGA manager");
>> + clk_disable_unprepare(priv->clk);
>
> prepare_cnt = 0, enable_cnt = -1 /* OOPS! */
>
> Clock management is still wonky. I think you only want clk_unprepare here.
>
>> + return err;
>> + }
>> +
>
> Assuming all goes well, you'll be leaving probe() with:
>
> prepare_cnt = 1, enable_cnt = 0.
>
>> + return 0;
>> +}
>> +
>> +static int zynq_fpga_remove(struct platform_device *pdev)
>> +{
>> + struct zynq_fpga_priv *priv;
>> +
>> + fpga_mgr_unregister(&pdev->dev);
>> +
>> + priv = platform_get_drvdata(pdev);
>> +
>> + clk_disable_unprepare(priv->clk);
>
> Which means, symmetrically, you'll only want this to be a clk_unprepare().
>
> Josh
Greg had already queued the v2 this weekend (which caught me by
suprise). I tried to figure out if it's possible to send a v3,
but he said to send follow up patches as he can't rebase the branch he
merged it into.
I will have access to hardware this afternoon, and send out follow up
patches to fix the unbalanced clock handling.
Cheers,
Moritz
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
