RE: [PATCH RFC V3 1/3] Input: goodix - add axis swapping and axis inversion support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





> -----Original Message-----
> From: Karsten Merker [mailto:merker@xxxxxxxxxx]
> Sent: 18 October, 2015 18:53
> To: Bastien Nocera; Dmitry Torokhov; Tirdea, Irina; Aleksei Mamlin; linux-input@xxxxxxxxxxxxxxx; Ian Campbell
> Cc: devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; Chen-Yu Tsai; Karsten Merker
> Subject: [PATCH RFC V3 1/3] Input: goodix - add axis swapping and axis inversion support
> 
> Implement support for the following device-tree and ACPI 5.1 DSD
> properties in the goodix touchscreen driver:
> 
>  - touchscreen-inverted-x:  X axis is inverted (boolean)
>  - touchscreen-inverted-y:  Y axis is inverted (boolean)
>  - touchscreen-swapped-x-y: X and Y axis are swapped (boolean)
> 
> These are necessary on tablets which have a display in portrait
> format while the touchscreen is in landscape format, such as e.g.
> the MSI Primo 81.
> 
> Signed-off-by: Karsten Merker <merker@xxxxxxxxxx>
> Tested-by: Bastien Nocera <hadess@xxxxxxxxxx>
> ---

Looks good to me, thanks for making the changes.
Tested this with ACPI _DSD properties.

Tested-by: Irina Tirdea <irina.tirdea@xxxxxxxxx>

>  drivers/input/touchscreen/goodix.c | 25 +++++++++++++++++++++++++
>  1 file changed, 25 insertions(+)
> 
> diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
> index 22bfc4b..b585123 100644
> --- a/drivers/input/touchscreen/goodix.c
> +++ b/drivers/input/touchscreen/goodix.c
> @@ -2,6 +2,7 @@
>   *  Driver for Goodix Touchscreens
>   *
>   *  Copyright (c) 2014 Red Hat Inc.
> + *  Copyright (c) 2015 K. Merker <merker@xxxxxxxxxx>
>   *
>   *  This code is based on gt9xx.c authored by andrew@xxxxxxxxxx:
>   *
> @@ -53,6 +54,9 @@ struct goodix_ts_data {
>  	atomic_t open_count;
>  	/* Protects power management calls and access to suspended flag */
>  	struct mutex mutex;
> +	bool swapped_x_y;
> +	bool inverted_x;
> +	bool inverted_y;
>  };
> 
>  #define GOODIX_GPIO_INT_NAME		"irq"
> @@ -271,6 +275,14 @@ static void goodix_ts_report_touch(struct goodix_ts_data *ts, u8 *coor_data)
>  		input_y = ts->abs_y_max - input_y;
>  	}
> 
> +	/* Inversions have to happen before axis swapping */
> +	if (ts->inverted_x)
> +		input_x = ts->abs_x_max - input_x;
> +	if (ts->inverted_y)
> +		input_y = ts->abs_y_max - input_y;
> +	if (ts->swapped_x_y)
> +		swap(input_x, input_y);
> +
>  	input_mt_slot(ts->input_dev, id);
>  	input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, true);
>  	input_report_abs(ts->input_dev, ABS_MT_POSITION_X, input_x);
> @@ -666,6 +678,8 @@ static void goodix_read_config(struct goodix_ts_data *ts)
>  			 error);
>  		ts->abs_x_max = GOODIX_MAX_WIDTH;
>  		ts->abs_y_max = GOODIX_MAX_HEIGHT;
> +		if (ts->swapped_x_y)
> +			swap(ts->abs_x_max, ts->abs_y_max);
>  		ts->int_trigger_type = GOODIX_INT_TRIGGER;
>  		ts->max_touch_num = GOODIX_MAX_CONTACTS;
>  		return;
> @@ -673,6 +687,8 @@ static void goodix_read_config(struct goodix_ts_data *ts)
> 
>  	ts->abs_x_max = get_unaligned_le16(&config[RESOLUTION_LOC]);
>  	ts->abs_y_max = get_unaligned_le16(&config[RESOLUTION_LOC + 2]);
> +	if (ts->swapped_x_y)
> +		swap(ts->abs_x_max, ts->abs_y_max);
>  	ts->int_trigger_type = config[TRIGGER_LOC] & 0x03;
>  	ts->max_touch_num = config[MAX_CONTACTS_LOC] & 0x0f;
>  	if (!ts->abs_x_max || !ts->abs_y_max || !ts->max_touch_num) {
> @@ -680,6 +696,8 @@ static void goodix_read_config(struct goodix_ts_data *ts)
>  			"Invalid config, using defaults\n");
>  		ts->abs_x_max = GOODIX_MAX_WIDTH;
>  		ts->abs_y_max = GOODIX_MAX_HEIGHT;
> +		if (ts->swapped_x_y)
> +			swap(ts->abs_x_max, ts->abs_y_max);
>  		ts->max_touch_num = GOODIX_MAX_CONTACTS;
>  	}
> 
> @@ -805,6 +823,13 @@ static int goodix_configure_dev(struct goodix_ts_data *ts)
>  {
>  	int error;
> 
> +	ts->swapped_x_y = device_property_read_bool(&ts->client->dev,
> +						    "touchscreen-swapped-x-y");
> +	ts->inverted_x = device_property_read_bool(&ts->client->dev,
> +						   "touchscreen-inverted-x");
> +	ts->inverted_y = device_property_read_bool(&ts->client->dev,
> +						   "touchscreen-inverted-y");
> +
>  	goodix_read_config(ts);
> 
>  	error = goodix_request_input_dev(ts);
> --
> 2.1.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux