Hi Kishon,
On 10/17/2015 8:48 AM, Kishon Vijay Abraham I wrote:
Hi,
On Tuesday 13 October 2015 03:52 PM, Yoshihiro Shimoda wrote:
To use the channel 0 of R-Car gen3 as periperal mode, This patch changes
the mode to OTG instead of HOST. Then, this driver needs to set some
registers to enable host mode and detects ID pin and VBUS pin at
phy_init() timing.
For now, the channel 0 can be used as host mode only.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
---
drivers/phy/phy-rcar-gen3-usb2.c | 126 ++++++++++++++++++++++++++++++++++++++-
1 file changed, 124 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/phy-rcar-gen3-usb2.c b/drivers/phy/phy-rcar-gen3-usb2.c
index d90dfcf..03d7079 100644
--- a/drivers/phy/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/phy-rcar-gen3-usb2.c
[ .... ] snip
+
+ dev_dbg(&ch->phy->dev, "%s: %08x, %d\n", __func__, tmp, host);
This shoulod be dev_vdbg.
I guess using dev_dbg() is equivalent.
I searched in same directory (drivers/phy) and the number of drivers
using dev_vdbg() are just few drivers. (in my search, only 3 drivers).
Other drivers use dev_dbg().
The last driver using dev_dbg was from Jan 2015.
I also recognized that dev_vdbug was used mostly in USB drivers...
Is it your favorite way or is there any good point of using dev_vdbg() ?
+ if (host)
+ tmp &= ~USB2_COMMCTRL_OTG_PERI;
+ else
+ tmp |= USB2_COMMCTRL_OTG_PERI;
+ writel(tmp, usb2_base + USB2_COMMCTRL);
+}
+
+static void rcar_gen3_set_linectrl(struct rcar_gen3_chan *ch, int dp, int dm)
+{
+ void __iomem *usb2_base = ch->usb2.base;
+ u32 tmp = readl(usb2_base + USB2_LINECTRL1);
+
+ dev_dbg(&ch->phy->dev, "%s: %08x, %d, %d\n", __func__, tmp, dp, dm);
same here.
[.....] snip
Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
