This patch adds the bindings for Altera PCIe host controller driver and
Altera PCIe MSI driver.
Signed-off-by: Ley Foon Tan <lftan@xxxxxxxxxx>
---
.../devicetree/bindings/pci/altera-pcie-msi.txt | 28 +++++++++++++
.../devicetree/bindings/pci/altera-pcie.txt | 49 ++++++++++++++++++++++
2 files changed, 77 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pci/altera-pcie-msi.txt
create mode 100644 Documentation/devicetree/bindings/pci/altera-pcie.txt
diff --git a/Documentation/devicetree/bindings/pci/altera-pcie-msi.txt b/Documentation/devicetree/bindings/pci/altera-pcie-msi.txt
new file mode 100644
index 0000000..09cd3bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/altera-pcie-msi.txt
@@ -0,0 +1,28 @@
+* Altera PCIe MSI controller
+
+Required properties:
+- compatible: should contain "altr,msi-1.0"
+- reg: specifies the physical base address of the controller and
+ the length of the memory mapped region.
+- reg-names: must include the following entries:
+ "csr": CSR registers
+ "vector_slave": vectors slave port region
+- interrupt-parent: interrupt source phandle.
+- interrupts: specifies the interrupt source of the parent interrupt
+ controller. The format of the interrupt specifier depends on the
+ parent interrupt controller.
+- num-vectors: number of vectors, range 1 to 32.
+- msi-controller: indicates that this is MSI controller node
+
+
+Example
+msi0: msi@0xFF200000 {
+ compatible = "altr,msi-1.0";
+ reg = <0xFF200000 0x00000010
+ 0xFF200010 0x00000080>;
+ reg-names = "csr", "vector_slave";
+ interrupt-parent = <&hps_0_arm_gic_0>;
+ interrupts = <0 42 4>;
+ msi-controller;
+ num-vectors = <32>;
+};
diff --git a/Documentation/devicetree/bindings/pci/altera-pcie.txt b/Documentation/devicetree/bindings/pci/altera-pcie.txt
new file mode 100644
index 0000000..2951a6a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/altera-pcie.txt
@@ -0,0 +1,49 @@
+* Altera PCIe controller
+
+Required properties:
+- compatible : should contain "altr,pcie-root-port-1.0"
+- reg: a list of physical base address and length for TXS and CRA.
+- reg-names: must include the following entries:
+ "Txs": TX slave port region
+ "Cra": Control register access region
+- interrupt-parent: interrupt source phandle.
+- interrupts: specifies the interrupt source of the parent interrupt controller.
+ The format of the interrupt specifier depends on the parent interrupt
+ controller.
+- device_type: must be "pci"
+- #address-cells: set to <3>
+- #size-cells: set to <2>
+- #interrupt-cells: set to <1>
+- ranges: describes the translation of addresses for root ports and standard
+ PCI regions.
+- interrupt-map-mask and interrupt-map: standard PCI properties to define the
+ mapping of the PCIe interface to interrupt numbers.
+
+Optional properties:
+- msi-parent: Link to the hardware entity that serves as the MSI controller for this PCIe
+ controller.
+- bus-range: PCI bus numbers covered
+
+Example
+ pcie_0: pcie@0xc00000000 {
+ compatible = "altr,pcie-root-port-1.0";
+ reg = <0xc0000000 0x20000000>,
+ <0xff220000 0x00004000>;
+ reg-names = "Txs", "Cra";
+ interrupt-parent = <&hps_0_arm_gic_0>;
+ interrupts = <0 40 4>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ bus-range = <0x0 0xFF>;
+ device_type = "pci";
+ msi-parent = <&msi_to_gic_gen_0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_0 1>,
+ <0 0 0 2 &pcie_0 2>,
+ <0 0 0 3 &pcie_0 3>,
+ <0 0 0 4 &pcie_0 4>;
+ ranges = <0x82000000 0x00000000 0x00000000 0xc0000000 0x00000000 0x10000000
+ 0x82000000 0x00000000 0x10000000 0xd0000000 0x00000000 0x10000000>;
+ };
--
1.8.2.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
