The default interrupt-parent has been set in the upper layer, apb@e80000
and apb@fc0000 for example. So if the interrupt-parent isn't changed, we
don't need to set it again. This patch removes the dumplicated
interrupt-parent settings.
Signed-off-by: Jisheng Zhang <jszhang@xxxxxxxxxxx>
---
arch/arm/boot/dts/berlin2q.dtsi | 6 ------
1 file changed, 6 deletions(-)
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index 63a4849..a3ecde5 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -293,7 +293,6 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x1400 0x100>;
- interrupt-parent = <&aic>;
interrupts = <4>;
clocks = <&chip_clk CLKID_CFG>;
pinctrl-0 = <&twsi0_pmux>;
@@ -306,7 +305,6 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x1800 0x100>;
- interrupt-parent = <&aic>;
interrupts = <5>;
clocks = <&chip_clk CLKID_CFG>;
pinctrl-0 = <&twsi1_pmux>;
@@ -505,7 +503,6 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x7000 0x100>;
- interrupt-parent = <&sic>;
interrupts = <6>;
clocks = <&refclk>;
pinctrl-0 = <&twsi2_pmux>;
@@ -518,7 +515,6 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x8000 0x100>;
- interrupt-parent = <&sic>;
interrupts = <7>;
clocks = <&refclk>;
pinctrl-0 = <&twsi3_pmux>;
@@ -529,7 +525,6 @@
uart0: uart@9000 {
compatible = "snps,dw-apb-uart";
reg = <0x9000 0x100>;
- interrupt-parent = <&sic>;
interrupts = <8>;
clocks = <&refclk>;
reg-shift = <2>;
@@ -541,7 +536,6 @@
uart1: uart@a000 {
compatible = "snps,dw-apb-uart";
reg = <0xa000 0x100>;
- interrupt-parent = <&sic>;
interrupts = <9>;
clocks = <&refclk>;
reg-shift = <2>;
--
2.6.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
