On 19.10.2015 15:03, Alim Akhtar wrote: > Now we can use the generic syscon-{reboot/poweroff} drivers, > so we don't need special handling for reboot/poweroff in > exynos pmu driver. This patch remove the same. > > Signed-off-by: Alim Akhtar <alim.akhtar@xxxxxxxxxxx> > --- > arch/arm/mach-exynos/pmu.c | 43 ------------------------------------------- > 1 file changed, 43 deletions(-) I think that removal of this stuff will effectively remove the restart/poweroff handlers from: 1. Other defconfigs, like multi_v7 2. Custom configs. Previously this code was always compiled in for ARCH_EXYNOS. Now it is not so I am thinking about selecting necessary drivers from main exynos Kconfig symbol. That could be tricky though, because "select" should be used only for non-visible symbols. Any ideas how to solve that? Best regards, Krzysztof > > diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c > index de68938ee6aa..393c04aa727e 100644 > --- a/arch/arm/mach-exynos/pmu.c > +++ b/arch/arm/mach-exynos/pmu.c > @@ -14,9 +14,6 @@ > #include <linux/of_address.h> > #include <linux/platform_device.h> > #include <linux/delay.h> > -#include <linux/notifier.h> > -#include <linux/reboot.h> > - > > #include "exynos-pmu.h" > #include "regs-pmu.h" > @@ -681,23 +678,6 @@ static unsigned int const exynos5420_list_disable_pmu_reg[] = { > EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG, > }; > > -static void exynos_power_off(void) > -{ > - unsigned int tmp; > - > - pr_info("Power down.\n"); > - tmp = pmu_raw_readl(EXYNOS_PS_HOLD_CONTROL); > - tmp ^= (1 << 8); > - pmu_raw_writel(tmp, EXYNOS_PS_HOLD_CONTROL); > - > - /* Wait a little so we don't give a false warning below */ > - mdelay(100); > - > - pr_err("Power down failed, please power off system manually.\n"); > - while (1) > - ; > -} > - > static void exynos5420_powerdown_conf(enum sys_powerdown mode) > { > u32 this_cluster; > @@ -875,14 +855,6 @@ static void exynos5420_pmu_init(void) > pr_info("EXYNOS5420 PMU initialized\n"); > } > > -static int pmu_restart_notify(struct notifier_block *this, > - unsigned long code, void *unused) > -{ > - pmu_raw_writel(0x1, EXYNOS_SWRESET); > - > - return NOTIFY_DONE; > -} > - > static const struct exynos_pmu_data exynos3250_pmu_data = { > .pmu_config = exynos3250_pmu_config, > .pmu_init = exynos3250_pmu_init, > @@ -940,20 +912,11 @@ static const struct of_device_id exynos_pmu_of_device_ids[] = { > { /*sentinel*/ }, > }; > > -/* > - * Exynos PMU restart notifier, handles restart functionality > - */ > -static struct notifier_block pmu_restart_handler = { > - .notifier_call = pmu_restart_notify, > - .priority = 128, > -}; > - > static int exynos_pmu_probe(struct platform_device *pdev) > { > const struct of_device_id *match; > struct device *dev = &pdev->dev; > struct resource *res; > - int ret; > > res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > pmu_base_addr = devm_ioremap_resource(dev, res); > @@ -978,12 +941,6 @@ static int exynos_pmu_probe(struct platform_device *pdev) > > platform_set_drvdata(pdev, pmu_context); > > - ret = register_restart_handler(&pmu_restart_handler); > - if (ret) > - dev_warn(dev, "can't register restart handler err=%d\n", ret); > - > - pm_power_off = exynos_power_off; > - > dev_dbg(dev, "Exynos PMU Driver probe done\n"); > return 0; > } > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html