Re: [RFC 3/5] ARM: dts: enable clock support for BCM5301X

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 10/13/2015 11:22 PM, Jon Mason wrote:
> Replace current device tree dummy clocks with real clock support for
> Broadcom Northstar SoCs.
> 
> Signed-off-by: Jon Mason <jonmason@xxxxxxxxxxxx>

The clock-frequency of the uarts should also be replaced with the
correct clock from the clock driver.

Hauke
> ---
>  arch/arm/boot/dts/bcm5301x.dtsi | 88 ++++++++++++++++++++++++++++++++---------
>  1 file changed, 69 insertions(+), 19 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
> index 6f50f67..1eca551 100644
> --- a/arch/arm/boot/dts/bcm5301x.dtsi
> +++ b/arch/arm/boot/dts/bcm5301x.dtsi
> @@ -8,6 +8,7 @@
>   * Licensed under the GNU/GPL. See COPYING for details.
>   */
>  
> +#include <dt-bindings/clock/bcm-nsp.h>
>  #include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/input/input.h>
>  #include <dt-bindings/interrupt-controller/irq.h>
> @@ -42,41 +43,48 @@
>  
>  	mpcore {
>  		compatible = "simple-bus";
> -		ranges = <0x00000000 0x19020000 0x00003000>;
> +		ranges = <0x00000000 0x19000000 0x00023000>;
>  		#address-cells = <1>;
>  		#size-cells = <1>;
>  
> -		scu@0000 {
> +		a9pll: arm_clk@00000 {
> +			#clock-cells = <0>;
> +			compatible = "brcm,nsp-armpll";
> +			clocks = <&osc>;
> +			reg = <0x00000 0x1000>;
> +		};
> +
> +		scu@20000 {
>  			compatible = "arm,cortex-a9-scu";
> -			reg = <0x0000 0x100>;
> +			reg = <0x20000 0x100>;
>  		};
>  
> -		timer@0200 {
> +		timer@20200 {
>  			compatible = "arm,cortex-a9-global-timer";
> -			reg = <0x0200 0x100>;
> +			reg = <0x20200 0x100>;
>  			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
> -			clocks = <&clk_periph>;
> +			clocks = <&periph_clk>;
>  		};
>  
> -		local-timer@0600 {
> +		local-timer@20600 {
>  			compatible = "arm,cortex-a9-twd-timer";
> -			reg = <0x0600 0x100>;
> +			reg = <0x20600 0x100>;
>  			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
> -			clocks = <&clk_periph>;
> +			clocks = <&periph_clk>;
>  		};
>  
> -		gic: interrupt-controller@1000 {
> +		gic: interrupt-controller@21000 {
>  			compatible = "arm,cortex-a9-gic";
>  			#interrupt-cells = <3>;
>  			#address-cells = <0>;
>  			interrupt-controller;
> -			reg = <0x1000 0x1000>,
> -			      <0x0100 0x100>;
> +			reg = <0x21000 0x1000>,
> +			      <0x20100 0x100>;
>  		};
>  
> -		L2: cache-controller@2000 {
> +		L2: cache-controller@22000 {
>  			compatible = "arm,pl310-cache";
> -			reg = <0x2000 0x1000>;
> +			reg = <0x22000 0x1000>;
>  			cache-unified;
>  			arm,shared-override;
>  			prefetch-data = <1>;
> @@ -94,14 +102,37 @@
>  
>  	clocks {
>  		#address-cells = <1>;
> -		#size-cells = <0>;
> +		#size-cells = <1>;
> +		ranges;
>  
> -		/* As long as we do not have a real clock driver us this
> -		 * fixed clock */
> -		clk_periph: periph {
> +		osc: oscillator {
> +			#clock-cells = <0>;
>  			compatible = "fixed-clock";
> +			clock-frequency = <25000000>;
> +		};
> +
> +		iprocmed: iprocmed {
> +			#clock-cells = <0>;
> +			compatible = "fixed-factor-clock";
> +			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
> +			clock-div = <2>;
> +			clock-mult = <1>;
> +		};
> +
> +		iprocslow: iprocslow {
> +			#clock-cells = <0>;
> +			compatible = "fixed-factor-clock";
> +			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
> +			clock-div = <4>;
> +			clock-mult = <1>;
> +		};
> +
> +		periph_clk: periph_clk {
>  			#clock-cells = <0>;
> -			clock-frequency = <400000000>;
> +			compatible = "fixed-factor-clock";
> +			clocks = <&a9pll>;
> +			clock-div = <2>;
> +			clock-mult = <1>;
>  		};
>  	};
>  
> @@ -178,6 +209,25 @@
>  		};
>  	};
>  
> +	lcpll0: lcpll0@1800c100 {
> +		#clock-cells = <1>;
> +		compatible = "brcm,nsp-lcpll0";
> +		reg = <0x1800c100 0x14>;
> +		clocks = <&osc>;
> +		clock-output-names = "lcpll0", "pcie_phy", "sdio",
> +				     "ddr_phy";
> +	};
> +
> +	genpll: genpll@1800c140 {
> +		#clock-cells = <1>;
> +		compatible = "brcm,nsp-genpll";
> +		reg = <0x1800c140 0x24>;
> +		clocks = <&osc>;
> +		clock-output-names = "genpll", "phy", "ethernetclk",
> +				     "usbclk", "iprocfast", "sata1",
> +				     "sata2";
> +	};
> +
>  	nand: nand@18028000 {
>  		compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
>  		reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
> 

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux