On 16/10/2015 at 13:31:29 +0200, Heiko Schocher wrote : > Add the clkout output clk to the common clock framework. > Disable the CLKOUT of the RTC after power-up. > After power-up/reset of the RTC, CLKOUT is enabled by default, > with CLKOUT enabled the RTC chip has 2-3 times higher power > consumption. > > Signed-off-by: Heiko Schocher <hs@xxxxxxx> > --- > > Changes in v4: > - add comments from Alexandre Belloni > - use devm_clk_register() instead of clk_register() > - rework Documentation > > Changes in v3: > - use CONFIG_COMMON_CLK for common clk framework > changes > > Changes in v2: > - add comments from Alexandre Belloni > - remove the DT property, instead > register for the CLKOUT a clk in the common > clk framework. The clk is disabled by default. > > Documentation/devicetree/bindings/rtc/pcf8563.txt | 25 ++++ > drivers/rtc/rtc-pcf8563.c | 170 +++++++++++++++++++++- > 2 files changed, 194 insertions(+), 1 deletion(-) > create mode 100644 Documentation/devicetree/bindings/rtc/pcf8563.txt > Applied, thanks. -- Alexandre Belloni, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html