Hello Florian,
Am 14.10.2015 um 06:17 schrieb Heiko Schocher:
Hello Florian,
Am 13.10.2015 um 21:26 schrieb Florian Fainelli:
On 12/10/15 22:13, Heiko Schocher wrote:
On some boards the energy enable detect mode leads in
trouble with some switches, so make the enabling of
this mode configurable through DT.
Signed-off-by: Heiko Schocher <hs@xxxxxxx>
---
.../devicetree/bindings/net/smsc-lan87xx.txt | 19 +++++++++++++++++
drivers/net/phy/smsc.c | 24 +++++++++++++++++-----
2 files changed, 38 insertions(+), 5 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/smsc-lan87xx.txt
diff --git a/Documentation/devicetree/bindings/net/smsc-lan87xx.txt
b/Documentation/devicetree/bindings/net/smsc-lan87xx.txt
new file mode 100644
index 0000000..39aa1dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/smsc-lan87xx.txt
@@ -0,0 +1,19 @@
+SMSC LAN87xx Ethernet PHY
+
+Some boards require special tuning values. Configure them
+through an Ethernet OF device node.
+
+Optional properties:
+
+- disable-energy-detect:
+ If set, do not enable energy detect mode for the SMSC phy.
+ default: enable energy detect mode
Although energy detection is something that is implemented by many PHYs,
I am not sure a generic property is suitable here, I would prefix that
with the SMSC vendor prefix here to make it clear this only applies to
this PHY.
Hmm... but all PHYs should be able to enable, disable it in some way, or?
ping?
Would not you want to make it a reverse property here though, something
like this:
smsc,energy-detect: boolean, when present indicates the PHY reliably
supports energy detection
Yes, that was also my first thought, but currently, on this PHYs
energy detect mode is on ... and if I introduce such a property,
it will disable it for all existing boards, because property is
missing ... so, maybe I break boards ...
I have a v2 prepared, but what to do here?
+
+Examples:
+
+ /* Attach to an Ethernet device with autodetected PHY */
+ &cpsw_emac0 {
+ phy_id = <&davinci_mdio>, <0>;
+ phy-mode = "mii";
+ disable-energy-detect;
+ };
diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index 70b0895..f90fbf3 100644
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -43,16 +43,30 @@ static int smsc_phy_ack_interrupt(struct phy_device *phydev)
static int smsc_phy_config_init(struct phy_device *phydev)
{
+#ifdef CONFIG_OF
+ int len;
+ struct device *dev = &phydev->dev;
+ struct device_node *of_node = dev->of_node;
That does not need to be ifdefd out, at best annontate with __maybe_unused?
Yes, I try it.
removed.
+#endif
int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
+ int enable_energy = 1;
if (rc < 0)
return rc;
- /* Enable energy detect mode for this SMSC Transceivers */
- rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
- rc | MII_LAN83C185_EDPWRDOWN);
- if (rc < 0)
- return rc;
+#ifdef CONFIG_OF
+ if (!of_node && dev->parent->of_node)
+ of_node = dev->parent->of_node;
That looks strange, why would the property be placed at the parent level
when this is a PHY device tree node property?
Hmm.. I recheck this.
Hmm.. the drivers/net/ethernet/ti/cpsw.c has no phy-handle
support ... I added this, so my v2 is now a patchset of 2 patches.
bye,
Heiko
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
