Re: [PATCH v3 08/10] clk: ns2: add clock support for Broadcom Northstar 2 SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




We need some sort of kconfig option to differentiate NS2 clock driver from being pulled in all the time.

On 15-10-15 12:48 PM, Jon Mason wrote:
The Broadcom Northstar 2 SoC is architected under the iProc
architecture. It has the following PLLs: GENPLL SCR, GENPLL SW,
LCPLL DDR, LCPLL Ports, all derived from an onboard crystal.

Signed-off-by: Jon Mason <jonmason@xxxxxxxxxxxx>
---
  drivers/clk/Makefile                |   2 +-
  drivers/clk/bcm/Makefile            |   1 +
  drivers/clk/bcm/clk-ns2.c           | 288 ++++++++++++++++++++++++++++++++++++
  include/dt-bindings/clock/bcm-ns2.h |  72 +++++++++
  4 files changed, 362 insertions(+), 1 deletion(-)
  create mode 100644 drivers/clk/bcm/clk-ns2.c
  create mode 100644 include/dt-bindings/clock/bcm-ns2.h

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index d08b3e5..6124bd3 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -47,7 +47,7 @@ obj-$(CONFIG_COMMON_CLK_WM831X)		+= clk-wm831x.o
  obj-$(CONFIG_COMMON_CLK_XGENE)		+= clk-xgene.o
  obj-$(CONFIG_COMMON_CLK_PWM)		+= clk-pwm.o
  obj-$(CONFIG_COMMON_CLK_AT91)		+= at91/
-obj-$(CONFIG_ARCH_BCM)			+= bcm/
+obj-y					+= bcm/
  obj-$(CONFIG_ARCH_BERLIN)		+= berlin/
  obj-$(CONFIG_ARCH_HISI)			+= hisilicon/
  obj-$(CONFIG_ARCH_MXC)			+= imx/
diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile
index e258b28..2d1cbc5 100644
--- a/drivers/clk/bcm/Makefile
+++ b/drivers/clk/bcm/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_CLK_BCM_KONA)	+= clk-kona-setup.o
  obj-$(CONFIG_CLK_BCM_KONA)	+= clk-bcm281xx.o
  obj-$(CONFIG_CLK_BCM_KONA)	+= clk-bcm21664.o
  obj-$(CONFIG_COMMON_CLK_IPROC)	+= clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o
+obj-$(CONFIG_COMMON_CLK_IPROC)	+= clk-ns2.o

NS2 code is dragged in for all IPROC SoCs. We need a config option for NS2 (CONFIG_ARCH_BCM_NS2) to avoid this (if Arnd allows this for ARMv8 processors... ?).

You can see below ARMv7 processors don't have this problem.

If not we need to add CONFIG_CLK_NS2.


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux