[PATCH] ARM: keystone: dts: add PCI serdes driver bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




This patch adds the required PCI serdes bindings whcih can then be
enabled by setting the corresponding statuses to "ok" in order to
configure and start the PCI serdes.

This patch depends on the updates to the Keystone PCIe host driver
and common serdes driver patch series that is submitted separately.

Signed-off-by: WingMan Kwok <w-kwok2@xxxxxx>
---
 arch/arm/boot/dts/k2e.dtsi      |   21 +++++++++++++++++++++
 arch/arm/boot/dts/keystone.dtsi |   21 +++++++++++++++++++++
 2 files changed, 42 insertions(+)

diff --git a/arch/arm/boot/dts/k2e.dtsi b/arch/arm/boot/dts/k2e.dtsi
index 675fb8e..3b36575 100644
--- a/arch/arm/boot/dts/k2e.dtsi
+++ b/arch/arm/boot/dts/k2e.dtsi
@@ -86,6 +86,16 @@
 			gpio,syscon-dev = <&devctrl 0x240>;
 		};
 
+		pcie1_phy: pciephy@2326000 {
+			#phy-cells = <0>;
+			compatible = "ti,keystone-serdes-pcie";
+			reg = <0x02326000 0x4000>;
+			reg-names = "serdes";
+			link-rate-kbps = <5000000>;
+			num-lanes = <2>;
+			status = "disabled";
+		};
+
 		pcie1: pcie@21020000 {
 			compatible = "ti,keystone-pcie","snps,dw-pcie";
 			clocks = <&clkpcie1>;
@@ -130,6 +140,17 @@
 					<GIC_SPI 375 IRQ_TYPE_EDGE_RISING>,
 					<GIC_SPI 376 IRQ_TYPE_EDGE_RISING>;
 			};
+
+			/* PCIE phy */
+			serdeses {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				serdes@0 {
+					reg = <0>;
+					phys = <&pcie1_phy>;
+				};
+			};
+
 		};
 
 		mdio: mdio@24200f00 {
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index 72816d6..6566cc4 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -275,6 +275,16 @@
 			ti,syscon-dev = <&devctrl 0x2a0>;
 		};
 
+		pcie0_phy: pciephy@2320000 {
+			#phy-cells = <0>;
+			compatible = "ti,keystone-serdes-pcie";
+			reg = <0x02320000 0x4000>;
+			reg-names = "serdes";
+			link-rate-kbps = <5000000>;
+			num-lanes = <2>;
+			status = "disabled";
+		};
+
 		pcie0: pcie@21800000 {
 			compatible = "ti,keystone-pcie", "snps,dw-pcie";
 			clocks = <&clkpcie>;
@@ -319,6 +329,17 @@
 					<GIC_SPI 28 IRQ_TYPE_EDGE_RISING>,
 					<GIC_SPI 29 IRQ_TYPE_EDGE_RISING>;
 			};
+
+			/* PCIE phy */
+			serdeses {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				serdes@0 {
+					reg = <0>;
+					phys = <&pcie0_phy>;
+				};
+			};
+
 		};
 	};
 };
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux