Binding documentation has been added in new subsystem specific binding documents. This patch removes the now duplicate documentation from the MFD documentation. Also whilst we are at it add a missing maintainers entry for the MFD binding document. Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx> Acked-by: Lee Jones <lee.jones@xxxxxxxxxx> --- No change since v1. Thanks, Charles Documentation/devicetree/bindings/mfd/arizona.txt | 30 ++------------------ MAINTAINERS | 1 + 2 files changed, 4 insertions(+), 27 deletions(-) diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt index a8fee60..077c4fe 100644 --- a/Documentation/devicetree/bindings/mfd/arizona.txt +++ b/Documentation/devicetree/bindings/mfd/arizona.txt @@ -30,21 +30,9 @@ Required properties: - #gpio-cells : Must be 2. The first cell is the pin number and the second cell is used to specify optional parameters (currently unused). - - AVDD-supply, DBVDD1-supply, CPVDD-supply : Power supplies for the device, - as covered in Documentation/devicetree/bindings/regulator/regulator.txt - - - DBVDD2-supply, DBVDD3-supply : Additional databus power supplies (wm5102, - wm5110, wm8280, wm8998, wm1814) - - - SPKVDDL-supply, SPKVDDR-supply : Speaker driver power supplies (wm5102, - wm5110, wm8280, wm8998, wm1814) - - - SPKVDD-supply : Speaker driver power supply (wm8997) - Optional properties: - wlf,reset : GPIO specifier for the GPIO controlling /RESET - - wlf,ldoena : GPIO specifier for the GPIO controlling LDOENA - wlf,gpio-defaults : A list of GPIO configuration register values. Defines for the appropriate values can found in <dt-bindings/mfd/arizona.txt>. If @@ -67,21 +55,9 @@ Optional properties: present, the number of values should be less than or equal to the number of inputs, unspecified inputs will use the chip default. - - wlf,hpdet-channel : Headphone detection channel. - ARIZONA_ACCDET_MODE_HPL or 1 - Headphone detect mode is set to HPDETL - ARIZONA_ACCDET_MODE_HPR or 2 - Headphone detect mode is set to HPDETR - If this node is not mentioned or if the value is unknown, then - headphone detection mode is set to HPDETL. - - - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if - they are being externally supplied. As covered in - Documentation/devicetree/bindings/regulator/regulator.txt - -Optional subnodes: - - ldo1 : Initial data for the LDO1 regulator, as covered in - Documentation/devicetree/bindings/regulator/regulator.txt - - micvdd : Initial data for the MICVDD regulator, as covered in - Documentation/devicetree/bindings/regulator/regulator.txt +Also see child specific device properties: + Regulator - ../regulator/arizona-regulator.txt + Extcon - ../extcon/extcon-arizona.txt Example: diff --git a/MAINTAINERS b/MAINTAINERS index 0e0889b..047f5d8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11382,6 +11382,7 @@ S: Supported F: Documentation/hwmon/wm83?? F: Documentation/devicetree/bindings/extcon/extcon-arizona.txt F: Documentation/devicetree/bindings/regulator/arizona-regulator.txt +F: Documentation/devicetree/bindings/mfd/arizona.txt F: arch/arm/mach-s3c64xx/mach-crag6410* F: drivers/clk/clk-wm83*.c F: drivers/extcon/extcon-arizona.c -- 1.7.2.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html