On Thu, Oct 15, 2015 at 03:46:41PM +0200, Linus Walleij wrote: > The RealView ARM11MPCore enables parity, eventmon and shared > override in the cache controller through its current boardfile, > but the code and DT bindings for the ARM L220 is currently > lacking the ability to set this up from DT. Add the required > bool parameters. > > Cc: devicetree@xxxxxxxxxxxxxxx > Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> > --- > I know this patch mixes code and DT changes but it is silly to > split such a small patch. Will submit this to Russell's patch > tracker if it looks OK to the DT people. (Or if they are quiet.) > --- > Documentation/devicetree/bindings/arm/l2cc.txt | 10 ++++++---- > arch/arm/mm/cache-l2x0.c | 15 +++++++++++++++ > 2 files changed, 21 insertions(+), 4 deletions(-) > > diff --git a/Documentation/devicetree/bindings/arm/l2cc.txt b/Documentation/devicetree/bindings/arm/l2cc.txt > index 06c88a4d28ac..4d262e9b3464 100644 > --- a/Documentation/devicetree/bindings/arm/l2cc.txt > +++ b/Documentation/devicetree/bindings/arm/l2cc.txt > @@ -67,12 +67,14 @@ Optional properties: > disable if zero. > - arm,prefetch-offset : Override prefetch offset value. Valid values are > 0-7, 15, 23, and 31. > -- arm,shared-override : The default behavior of the pl310 cache controller with > - respect to the shareable attribute is to transform "normal memory > - non-cacheable transactions" into "cacheable no allocate" (for reads) or > - "write through no write allocate" (for writes). > +- arm,shared-override : The default behavior of the PL220 or PL310 cache > + controllers with respect to the shareable attribute is to transform "normal > + memory non-cacheable transactions" into "cacheable no allocate" (for reads) > + or "write through no write allocate" (for writes). > On systems where this may cause DMA buffer corruption, this property must be > specified to indicate that such transforms are precluded. > +- arm,parity-enable : enable parity checking on the L2 cache (PL220 only). > +- arm,eventmon-enable : enable the event monitor on the L2 cache (PL220 only). I don't think we should introduce a DT property for this: if we support the event monitor, then the event monitor support code should be controlling this bit. -- FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up according to speedtest.net. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
