On Wed, 14 Oct 2015, Charles Keepax wrote: > Binding documentation has been added in new subsystem specific binding > documents. This patch removes the now duplicate documentation from the > MFD documentation. Also whilst we are at it add a missing maintainers > entry for the MFD binding document. > > Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx> > --- > Documentation/devicetree/bindings/mfd/arizona.txt | 30 ++------------------ > MAINTAINERS | 1 + > 2 files changed, 4 insertions(+), 27 deletions(-) Nice. For my own reference: Acked-by: Lee Jones <lee.jones@xxxxxxxxxx> Once everyone is happy with the other two patches, I'll pick this. > diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt > index a8fee60..077c4fe 100644 > --- a/Documentation/devicetree/bindings/mfd/arizona.txt > +++ b/Documentation/devicetree/bindings/mfd/arizona.txt > @@ -30,21 +30,9 @@ Required properties: > - #gpio-cells : Must be 2. The first cell is the pin number and the > second cell is used to specify optional parameters (currently unused). > > - - AVDD-supply, DBVDD1-supply, CPVDD-supply : Power supplies for the device, > - as covered in Documentation/devicetree/bindings/regulator/regulator.txt > - > - - DBVDD2-supply, DBVDD3-supply : Additional databus power supplies (wm5102, > - wm5110, wm8280, wm8998, wm1814) > - > - - SPKVDDL-supply, SPKVDDR-supply : Speaker driver power supplies (wm5102, > - wm5110, wm8280, wm8998, wm1814) > - > - - SPKVDD-supply : Speaker driver power supply (wm8997) > - > Optional properties: > > - wlf,reset : GPIO specifier for the GPIO controlling /RESET > - - wlf,ldoena : GPIO specifier for the GPIO controlling LDOENA > > - wlf,gpio-defaults : A list of GPIO configuration register values. Defines > for the appropriate values can found in <dt-bindings/mfd/arizona.txt>. If > @@ -67,21 +55,9 @@ Optional properties: > present, the number of values should be less than or equal to the > number of inputs, unspecified inputs will use the chip default. > > - - wlf,hpdet-channel : Headphone detection channel. > - ARIZONA_ACCDET_MODE_HPL or 1 - Headphone detect mode is set to HPDETL > - ARIZONA_ACCDET_MODE_HPR or 2 - Headphone detect mode is set to HPDETR > - If this node is not mentioned or if the value is unknown, then > - headphone detection mode is set to HPDETL. > - > - - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if > - they are being externally supplied. As covered in > - Documentation/devicetree/bindings/regulator/regulator.txt > - > -Optional subnodes: > - - ldo1 : Initial data for the LDO1 regulator, as covered in > - Documentation/devicetree/bindings/regulator/regulator.txt > - - micvdd : Initial data for the MICVDD regulator, as covered in > - Documentation/devicetree/bindings/regulator/regulator.txt > +Also see child specific device properties: > + Regulator - ../regulator/arizona-regulator.txt > + Extcon - ../extcon/extcon-arizona.txt > > Example: > > diff --git a/MAINTAINERS b/MAINTAINERS > index f353491..544c747 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -11395,6 +11395,7 @@ S: Supported > F: Documentation/hwmon/wm83?? > F: Documentation/devicetree/bindings/extcon/extcon-arizona.txt > F: Documentation/devicetree/bindings/regulator/arizona-regulator.txt > +F: Documentation/devicetree/bindings/mfd/arizona.txt > F: arch/arm/mach-s3c64xx/mach-crag6410* > F: drivers/clk/clk-wm83*.c > F: drivers/extcon/extcon-arizona.c -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
