Add sdmmc and flexcom devices Signed-off-by: Ludovic Desroches <ludovic.desroches@xxxxxxxxx> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx> --- arch/arm/boot/dts/at91-sama5d2_xplained.dts | 106 ++++++++++++++++++++++++++++ 1 file changed, 106 insertions(+) diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index dc23979..bce9597 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -45,6 +45,7 @@ /dts-v1/; #include "sama5d2.dtsi" #include "sama5d2-pinfunc.h" +#include <dt-bindings/mfd/atmel-flexcom.h> / { model = "Atmel SAMA5D2 Xplained"; @@ -91,6 +92,22 @@ status = "okay"; }; + sdmmc0: sdio-host@a0000000 { + bus-width = <8>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc0_default>; + non-removable; + mmc-ddr-1_8v; + status = "okay"; + }; + + sdmmc1: sdio-host@b0000000 { + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc1_default>; + status = "okay"; /* conflict with qspi0 */ + }; + apb { spi0: spi@f8000000 { pinctrl-names = "default"; @@ -124,12 +141,49 @@ status = "okay"; }; + flx0: flexcom@f8034000 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; + status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */ + + uart5: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&flx0_clk>; + clock-names = "usart"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx0_default>; + atmel,fifo-size = <32>; + status = "okay"; + }; + }; + uart3: serial@fc008000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3_default>; status = "okay"; }; + flx4: flexcom@fc018000 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; + status = "okay"; + + i2c2: i2c@600 { + compatible = "atmel,sama5d2-i2c"; + reg = <0x600 0x200>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <0>, <0>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&flx4_clk>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx4_default>; + atmel,fifo-size = <16>; + status = "okay"; + }; + }; + i2c1: i2c@fc028000 { dmas = <0>, <0>; pinctrl-names = "default"; @@ -144,6 +198,18 @@ }; pinctrl@fc038000 { + pinctrl_flx0_default: flx0_default { + pinmux = <PIN_PB28__FLEXCOM0_IO0>, + <PIN_PB29__FLEXCOM0_IO1>; + bias-disable; + }; + + pinctrl_flx4_default: flx4_default { + pinmux = <PIN_PD12__FLEXCOM4_IO0>, + <PIN_PD13__FLEXCOM4_IO1>; + bias-disable; + }; + pinctrl_i2c0_default: i2c0_default { pinmux = <PIN_PD21__TWD0>, <PIN_PD22__TWCK0>; @@ -170,6 +236,46 @@ bias-disable; }; + pinctrl_sdmmc0_default: sdmmc0_default { + cmd_data { + pinmux = <PIN_PA1__SDMMC0_CMD>, + <PIN_PA2__SDMMC0_DAT0>, + <PIN_PA3__SDMMC0_DAT1>, + <PIN_PA4__SDMMC0_DAT2>, + <PIN_PA5__SDMMC0_DAT3>, + <PIN_PA6__SDMMC0_DAT4>, + <PIN_PA7__SDMMC0_DAT5>, + <PIN_PA8__SDMMC0_DAT6>, + <PIN_PA9__SDMMC0_DAT7>; + bias-pull-up; + }; + + ck_cd_rstn_vddsel { + pinmux = <PIN_PA0__SDMMC0_CK>, + <PIN_PA10__SDMMC0_RSTN>, + <PIN_PA11__SDMMC0_VDDSEL>, + <PIN_PA13__SDMMC0_CD>; + bias-disable; + }; + }; + + pinctrl_sdmmc1_default: sdmmc1_default { + cmd_data { + pinmux = <PIN_PA28__SDMMC1_CMD>, + <PIN_PA18__SDMMC1_DAT0>, + <PIN_PA19__SDMMC1_DAT1>, + <PIN_PA20__SDMMC1_DAT2>, + <PIN_PA21__SDMMC1_DAT3>; + bias-pull-up; + }; + + conf-ck_cd { + pinmux = <PIN_PA22__SDMMC1_CK>, + <PIN_PA30__SDMMC1_CD>; + bias-disable; + }; + }; + pinctrl_spi0_default: spi0_default { pinmux = <PIN_PA14__SPI0_SPCK>, <PIN_PA15__SPI0_MOSI>, -- 2.5.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html