Hi Arnd,
On 10/01/2015 05:42 PM, Arnd Bergmann wrote:
On Thursday 01 October 2015 13:39:29 Alim Akhtar wrote:
+static int exynos7_ufs_drv_init(struct device *dev, struct exynos_ufs *ufs)
+{
+ int ret;
+ const char *const clks[] = {
+ "mout_sclk_combo_phy_embedded",
+ "top_sclk_phy_fsys1_26m",
+ };
+
These clocks are neither in the binding nor in the example.
ok, I am cleaning this a bit, this will come from DT.
+struct exynos_ufs_drv_data exynos_ufs_drvs[] = {
+{
+ .compatible = "samsung,exynos7-ufs",
+ .uic_attr = &exynos7_uic_attr,
+ .quirks = UFSHCI_QUIRK_BYTE_ALIGN_UTRD |
+ UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR |
+ UFSHCI_QUIRK_BROKEN_HCE |
+ UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR,
+ .opts = EXYNOS_UFS_OPT_HAS_APB_CLK_CTRL |
+ EXYNOS_UFS_OPT_BROKEN_AUTO_CLK_CTRL |
+ EXYNOS_UFS_OPT_BROKEN_RX_SEL_IDX,
+ .drv_init = exynos7_ufs_drv_init,
+ .pre_link = exynos7_ufs_pre_link,
+ .post_link = exynos7_ufs_post_link,
+ .pre_pwr_change = exynos7_ufs_pre_pwr_change,
+ .post_pwr_change = exynos7_ufs_post_pwr_change,
+}, {
+}, };
The indentation is a bit unusual here.
hmm..ok will change
diff --git a/drivers/scsi/ufs/ufs-exynos-hw.h b/drivers/scsi/ufs/ufs-exynos-hw.h
new file mode 100644
index 0000000..8464ec8
--- /dev/null
+++ b/drivers/scsi/ufs/ufs-exynos-hw.h
@@ -0,0 +1,43 @@
+/*
+ * UFS Host Controller driver for Exynos specific extensions
+ *
+ * Copyright (C) 2014-2015 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _UFS_EXYNOS_HW_H_
+#define _UFS_EXYNOS_HW_H_
+
+#include "ufs-exynos.h"
+#include "unipro.h"
+
+static struct exynos_ufs_uic_attr exynos7_uic_attr = {
You cannot put 'static' variables into a header file.
will remove
+
+/**
+ * exynos_ufs_auto_ctrl_hcc - HCI core clock control by h/w
+ * Control should be disabled in the below cases
+ * - Before host controller S/W reset
+ * - Access to UFS protector's register
+ */
+static void exynos_ufs_auto_ctrl_hcc(struct exynos_ufs *ufs, bool en)
+{
+ u32 misc = hci_readl(ufs, HCI_MISC);
+
+ if (en)
+ hci_writel(ufs, misc | HCI_CORECLK_CTRL_EN, HCI_MISC);
+ else
+ hci_writel(ufs, misc & ~HCI_CORECLK_CTRL_EN, HCI_MISC);
Does this need a spinlock to ensure the change is done atomically?
will check and if needed will add,
+}
+
+static void exynos_ufs_ctrl_clkstop(struct exynos_ufs *ufs, bool en)
+{
+ u32 ctrl = hci_readl(ufs, HCI_CLKSTOP_CTRL);
+ u32 misc = hci_readl(ufs, HCI_MISC);
+
+ if (en) {
+ hci_writel(ufs, misc | CLK_CTRL_EN_MASK, HCI_MISC);
+ hci_writel(ufs, ctrl | CLK_STOP_MASK, HCI_CLKSTOP_CTRL);
+ } else {
+ hci_writel(ufs, ctrl & ~CLK_STOP_MASK, HCI_CLKSTOP_CTRL);
+ hci_writel(ufs, misc & ~CLK_CTRL_EN_MASK, HCI_MISC);
+ }
same here.
+
+static int exynos_ufs_get_clk_info(struct exynos_ufs *ufs)
+{
+ struct ufs_hba *hba = ufs->hba;
+ struct list_head *head = &hba->clk_list_head;
+ struct ufs_clk_info *clki;
+ u32 pclk_rate;
+ u32 f_min, f_max;
+ u8 div = 0;
+ int ret = 0;
+
+ if (!head || list_empty(head))
+ goto out;
+
+ list_for_each_entry(clki, head, list) {
+ if (!IS_ERR_OR_NULL(clki->clk)) {
+ if (!strcmp(clki->name, "aclk_ufs"))
+ ufs->clk_hci_core = clki->clk;
+ else if (!strcmp(clki->name, "sclk_unipro_apb"))
+ ufs->clk_apb = clki->clk;
+ else if (!strcmp(clki->name, "sclk_unipro_main"))
+ ufs->clk_unipro_main = clki->clk;
+ }
+ }
Using IS_ERR_OR_NULL is normally a bug. Also the list/loop can likely be
replaced with another way to express this.
ok
+ do {
+ delta = h8_time - ktime_us_delta(ktime_get(),
+ ufs->entry_hibern8_t);
+ if (delta <= 0)
+ break;
+
+ us = min_t(s64, delta, USEC_PER_MSEC);
+ if (us >= 10)
+ usleep_range(us, us + 10);
+ else
+ udelay(us);
+ } while (1);
us is at least 1000 (USEC_PER_MSEC), so the else clause is never needed.
+
+const struct ufs_hba_variant_ops ufs_hba_exynos_ops = {
+ .name = "exynos_ufs",
+ .init = exynos_ufs_init,
+ .hce_enable_notify = exynos_ufs_hce_enable_notify,
+ .link_startup_notify = exynos_ufs_link_startup_notify,
+ .pwr_change_notify = exynos_ufs_pwr_change_notify,
+ .specify_nexus_t_xfer_req = exynos_ufs_specify_nexus_t_xfer_req,
+ .specify_nexus_t_tm_req = exynos_ufs_specify_nexus_t_tm_req,
+ .hibern8_notify = exynos_ufs_hibern8_notify,
+ .suspend = exynos_ufs_suspend,
+ .resume = exynos_ufs_resume,
+};
+EXPORT_SYMBOL(ufs_hba_exynos_ops);
As mentioned in my reply to the build bug report, please restructure the
driver so this is not a global exported function but gets passed by the
probe function of the exynos driver into an exported function of the
common driver.
Done,
diff --git a/drivers/scsi/ufs/ufs-exynos.h b/drivers/scsi/ufs/ufs-exynos.h
new file mode 100644
index 0000000..58aa714
--- /dev/null
+++ b/drivers/scsi/ufs/ufs-exynos.h
@@ -0,0 +1,463 @@
+/*
+ * UFS Host Controller driver for Exynos specific extensions
+ *
+ * Copyright (C) 2014-2015 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _UFS_EXYNOS_H_
+#define _UFS_EXYNOS_H_
You have a lot of things in this header that are only used in one of the
.c files, so just move them there and make the header as small as possible.
hmm..these are mostly the registers defines, will removes the one which
are not being used as of now.
Do you think I should sill move them to .c file?
Arnd
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
