On Wed, 07 Oct 2015, Krzysztof Kozlowski wrote: > There are different revisions of the same chipset. For example S2MPS13 has > more than 2 revisions. They differ slightly in regulator constraints. > Print the revision number to easily find which PMIC is used on the board. > > Signed-off-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx> > > --- > > Changs since v1: > None. > --- > drivers/mfd/sec-core.c | 10 ++++++++++ > 1 file changed, 10 insertions(+) Applied, thanks. > diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c > index 2d1137a7a0ee..589e5efc2d7f 100644 > --- a/drivers/mfd/sec-core.c > +++ b/drivers/mfd/sec-core.c > @@ -253,6 +253,15 @@ static const struct regmap_config s5m8767_regmap_config = { > .cache_type = REGCACHE_FLAT, > }; > > +static void sec_pmic_dump_rev(struct sec_pmic_dev *sec_pmic) > +{ > + unsigned int val; > + > + /* For each device type, the REG_ID is always the first register */ > + if (!regmap_read(sec_pmic->regmap_pmic, S2MPS11_REG_ID, &val)) > + dev_dbg(sec_pmic->dev, "Revision: 0x%x\n", val); > +} > + > #ifdef CONFIG_OF > /* > * Only the common platform data elements for s5m8767 are parsed here from the > @@ -425,6 +434,7 @@ static int sec_pmic_probe(struct i2c_client *i2c, > goto err_mfd; > > device_init_wakeup(sec_pmic->dev, sec_pmic->wakeup); > + sec_pmic_dump_rev(sec_pmic); > > return ret; > -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html