* Mugunthan V N <mugunthanvnm@xxxxxx> [151012 02:12]: > The mmc/sd card detect gpio definition in DT is not defined as > per hardware design, the card detect gpio is an active low > signal. > > As per MMC/SD device tree binding documentation, the card detect > signal should be an active low signal and when ever a hardware is > designed with an active high card detect gpio then "cd-inverted" > dt parameter should be used to detect the actual status for the > card. > > This was not captured till now because gpio is used as interrupt > source and mmc_rescan task is scheduled. The value of the gpio > is not used to determine card presence. OK applying into omap-for-v4.4/dt thanks. Tony -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html