Currently the DT bindings have details about the driver as well. This patch moves this to a separate document for knav qmss driver so that driver detail update can be done as needed without polluting the DT bindings description. Signed-off-by: Murali Karicheri <m-karicheri2@xxxxxx> --- Documentation/arm/keystone/knav-qmss.txt | 24 ++++++++++++++++++++++ .../bindings/soc/ti/keystone-navigator-qmss.txt | 20 ++++-------------- 2 files changed, 28 insertions(+), 16 deletions(-) create mode 100644 Documentation/arm/keystone/knav-qmss.txt diff --git a/Documentation/arm/keystone/knav-qmss.txt b/Documentation/arm/keystone/knav-qmss.txt new file mode 100644 index 0000000..79946d1 --- /dev/null +++ b/Documentation/arm/keystone/knav-qmss.txt @@ -0,0 +1,24 @@ +* Texas Instruments Keystone Navigator Queue Management SubSystem driver + +Driver source code path + drivers/soc/ti/knav_qmss.c + drivers/soc/ti/knav_qmss_acc.c + +The QMSS (Queue Manager Sub System) found on Keystone SOCs is one of +the main hardware sub system which forms the backbone of the Keystone +multi-core Navigator. QMSS consist of queue managers, packed-data structure +processors(PDSP), linking RAM, descriptor pools and infrastructure +Packet DMA. +The Queue Manager is a hardware module that is responsible for accelerating +management of the packet queues. Packets are queued/de-queued by writing or +reading descriptor address to a particular memory mapped location. The PDSPs +perform QMSS related functions like accumulation, QoS, or event management. +Linking RAM registers are used to link the descriptors which are stored in +descriptor RAM. Descriptor RAM is configurable as internal or external memory. +The QMSS driver manages the PDSP setups, linking RAM regions, +queue pool management (allocation, push, pop and notify) and descriptor +pool management. + +knav qmss driver provides a set of APIs to drivers to open/close qmss queues, +allocate descriptor pools, map the descriptors, push/pop to queues etc. For +details of the available APIs, please refers to include/linux/soc/ti/knav_qmss.h diff --git a/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt b/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt index d8e8cdb..2cecea1 100644 --- a/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt +++ b/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt @@ -1,20 +1,8 @@ -* Texas Instruments Keystone Navigator Queue Management SubSystem driver - -The QMSS (Queue Manager Sub System) found on Keystone SOCs is one of -the main hardware sub system which forms the backbone of the Keystone -multi-core Navigator. QMSS consist of queue managers, packed-data structure -processors(PDSP), linking RAM, descriptor pools and infrastructure -Packet DMA. -The Queue Manager is a hardware module that is responsible for accelerating -management of the packet queues. Packets are queued/de-queued by writing or -reading descriptor address to a particular memory mapped location. The PDSPs -perform QMSS related functions like accumulation, QoS, or event management. -Linking RAM registers are used to link the descriptors which are stored in -descriptor RAM. Descriptor RAM is configurable as internal or external memory. -The QMSS driver manages the PDSP setups, linking RAM regions, -queue pool management (allocation, push, pop and notify) and descriptor -pool management. +* Texas Instruments Keystone Navigator (knav) Queue Management SubSystem driver + DT bindings +For details of the driver, please refer to +Documentation/arm/keystone/knav-qmss.txt Required properties: - compatible : Must be "ti,keystone-navigator-qmss"; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
