On Fri, Oct 9, 2015 at 4:37 PM, Edward Cragg
<edward.cragg@xxxxxxxxxxxxxxx> wrote:
> Add the blue status LED to the Hardkernel Odroid C1 board DTS.
> This is the only programmable LED on the board.
>
> Signed-off-by: Edward Cragg <edward.cragg@xxxxxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/meson8b-odroidc1.dts | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
> index a8e2911..3b03523 100644
> --- a/arch/arm/boot/dts/meson8b-odroidc1.dts
> +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
> @@ -1,6 +1,8 @@
> /*
> * Copyright 2015 Endless Mobile, Inc.
> * Author: Carlo Caione <carlo@xxxxxxxxxxxx>
> + * Copyright 2015 Codethink Ltd.
> + * Author: Edward Cragg <edward.cragg@xxxxxxxxxxxxxxx>
Usually we do not add a copyright line for each small addition to the DTS.
> *
> * This file is dual-licensed: you can use it either under the terms
> * of the GPL or the X11 license, at your option. Note that this dual
> @@ -46,6 +48,7 @@
>
> /dts-v1/;
> #include "meson8b.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
>
> / {
> model = "Hardkernel ODROID-C1";
> @@ -58,6 +61,16 @@
> memory {
> reg = <0x40000000 0x40000000>;
> };
> +
> + leds {
> + compatible = "gpio-leds";
> + blue {
> + label = "c1:blue:alive";
> + gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
> + linux,default-trigger = "heartbeat";
> + default-state = "off";
> + };
> + };
> };
otherwise Acked-by: Carlo Caione <carlo@xxxxxxxxxxxx>
--
Carlo Caione
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
