Hi Andrew,
On lun., oct. 12 2015, Andrew Lunn <andrew@xxxxxxx> wrote:
> On Sat, Oct 10, 2015 at 12:10:39AM +0200, Arnaud Ebalard wrote:
>>
>> This cosmetic patch reorder nodes under internal-regs by increasing
>> address order, as epxected.
>
> expected.
>
> Gregory, can you fix that as you commit?
Done!
>
> Acked-by: Andrew Lunn <andrew@xxxxxxx>
>
> Andrew
>
>>
>> Signed-off-by: Arnaud Ebalard <arno@xxxxxxxxxxxx>
>> ---
>> arch/arm/boot/dts/armada-xp-netgear-rn2120.dts | 86 +++++++++++++-------------
>> 1 file changed, 43 insertions(+), 43 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
>> index 85b2f87c0b8a..d72a69d97ba2 100644
>> --- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
>> +++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
>> @@ -94,54 +94,11 @@
>> status = "disabled";
>> };
>>
>> - /* Two rear eSATA ports */
>> - sata@a0000 {
>> - nr-ports = <2>;
>> - status = "okay";
>> - };
>> -
>> - serial@12000 {
>> - status = "okay";
>> - };
>> -
>> - mdio {
>> - phy0: ethernet-phy@0 { /* Marvell 88E1318 */
>> - reg = <0>;
>> - };
>> -
>> - phy1: ethernet-phy@1 { /* Marvell 88E1318 */
>> - reg = <1>;
>> - };
>> - };
>> -
>> - ethernet@70000 {
>> - status = "okay";
>> - phy = <&phy0>;
>> - phy-mode = "rgmii-id";
>> - };
>> -
>> - ethernet@74000 {
>> - status = "okay";
>> - phy = <&phy1>;
>> - phy-mode = "rgmii-id";
>> - };
>> -
>> - /* Front USB 2.0 port */
>> - usb@50000 {
>> - status = "okay";
>> - };
>> -
>> i2c@11000 {
>> compatible = "marvell,mv64xxx-i2c";
>> clock-frequency = <400000>;
>> status = "okay";
>>
>> - isl12057: isl12057@68 {
>> - compatible = "isil,isl12057";
>> - reg = <0x68>;
>> - isil,irq2-can-wakeup-machine;
>> - };
>> -
>> /* Controller for rear fan #1 of 3 (Protechnic
>> * MGT4012XB-O20, 8000RPM) near eSATA port */
>> g762_fan1: g762@3e {
>> @@ -178,6 +135,49 @@
>> compatible = "gmt,g751";
>> reg = <0x4c>;
>> };
>> +
>> + isl12057: isl12057@68 {
>> + compatible = "isil,isl12057";
>> + reg = <0x68>;
>> + isil,irq2-can-wakeup-machine;
>> + };
>> + };
>> +
>> + serial@12000 {
>> + status = "okay";
>> + };
>> +
>> + /* Front USB 2.0 port */
>> + usb@50000 {
>> + status = "okay";
>> + };
>> +
>> + mdio {
>> + phy0: ethernet-phy@0 { /* Marvell 88E1318 */
>> + reg = <0>;
>> + };
>> +
>> + phy1: ethernet-phy@1 { /* Marvell 88E1318 */
>> + reg = <1>;
>> + };
>> + };
>> +
>> + ethernet@70000 {
>> + status = "okay";
>> + phy = <&phy0>;
>> + phy-mode = "rgmii-id";
>> + };
>> +
>> + ethernet@74000 {
>> + status = "okay";
>> + phy = <&phy1>;
>> + phy-mode = "rgmii-id";
>> + };
>> +
>> + /* Two rear eSATA ports */
>> + sata@a0000 {
>> + nr-ports = <2>;
>> + status = "okay";
>> };
>>
>> nand@d0000 {
>> --
>> 2.5.3
>>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
