VC4 is the GPU (display and 3D) present on the 2835.
Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
---
v2: Sort by register address, mark HDMI as disabled by default in the
SoC file and enable it from -rpi.
v3: Add references to the pixel/HSM clocks for HDMI. Rename
compatibility strings and clean up node names.
arch/arm/boot/dts/bcm2835-rpi.dtsi | 4 ++++
arch/arm/boot/dts/bcm2835.dtsi | 42 ++++++++++++++++++++++++++++++++++++++
2 files changed, 46 insertions(+)
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index 3572f03..dcaaee2 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -56,6 +56,10 @@
status = "okay";
};
+&hdmi {
+ status = "okay";
+};
+
&sdhci {
status = "okay";
bus-width = <4>;
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index 1e61eb7..21e354a9 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -1,4 +1,5 @@
#include <dt-bindings/pinctrl/bcm2835.h>
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/bcm2835.h>
#include "skeleton.dtsi"
@@ -149,6 +150,18 @@
status = "disabled";
};
+ pixelvalve@7e206000 {
+ compatible = "brcm,bcm2835-pixelvalve0";
+ reg = <0x7e206000 0x100>;
+ interrupts = <2 13>; /* pwa2 */
+ };
+
+ pixelvalve@7e207000 {
+ compatible = "brcm,bcm2835-pixelvalve1";
+ reg = <0x7e207000 0x100>;
+ interrupts = <2 14>; /* pwa1 */
+ };
+
sdhci: sdhci@7e300000 {
compatible = "brcm,bcm2835-sdhci";
reg = <0x7e300000 0x100>;
@@ -157,6 +170,12 @@
status = "disabled";
};
+ hvs@7e400000 {
+ compatible = "brcm,bcm2835-hvs";
+ reg = <0x7e400000 0x6000>;
+ interrupts = <2 1>;
+ };
+
i2c1: i2c@7e804000 {
compatible = "brcm,bcm2835-i2c";
reg = <0x7e804000 0x1000>;
@@ -177,6 +196,25 @@
status = "disabled";
};
+ pixelvalve@7e807000 {
+ compatible = "brcm,bcm2835-pixelvalve2";
+ reg = <0x7e807000 0x100>;
+ interrupts = <2 10>; /* pixelvalve */
+ };
+
+ hdmi: hdmi@7e902000 {
+ compatible = "brcm,bcm2835-hdmi";
+ reg = <0x7e902000 0x600>,
+ <0x7e808000 0x100>;
+ interrupts = <2 8>, <2 9>;
+ ddc = <&i2c2>;
+ hpd-gpio = <&gpio 46 GPIO_ACTIVE_HIGH>;
+ clocks = <&clocks BCM2835_PLLH_PIX>,
+ <&clocks BCM2835_CLOCK_HSM>;
+ clock-names = "pixel", "hdmi";
+ status = "disabled";
+ };
+
usb@7e980000 {
compatible = "brcm,bcm2835-usb";
reg = <0x7e980000 0x10000>;
@@ -186,6 +224,10 @@
arm-pmu {
compatible = "arm,arm1176-pmu";
};
+
+ vc4: gpu@7e4c0000 {
+ compatible = "brcm,bcm2835-vc4";
+ };
};
clocks {
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
