Implement support for the following device-tree properties in the goodix touchscreen driver: - touchscreen-inverted-x: X axis is inverted (boolean) - touchscreen-inverted-y: Y axis is inverted (boolean) - touchscreen-swapped-x-y: X and Y axis are swapped (boolean) These are necessary on tablets which have a display in portrait format while the touchscreen is in landscape format, such as e.g. the MSI Primo 81. Signed-off-by: Karsten Merker <merker@xxxxxxxxxx> --- drivers/input/touchscreen/goodix.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index 22bfc4b..a05bdad 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -2,6 +2,7 @@ * Driver for Goodix Touchscreens * * Copyright (c) 2014 Red Hat Inc. + * Copyright (c) 2015 K. Merker <merker@xxxxxxxxxx> * * This code is based on gt9xx.c authored by andrew@xxxxxxxxxx: * @@ -53,6 +54,9 @@ struct goodix_ts_data { atomic_t open_count; /* Protects power management calls and access to suspended flag */ struct mutex mutex; + bool swapped_x_y; + bool inverted_x; + bool inverted_y; }; #define GOODIX_GPIO_INT_NAME "irq" @@ -271,6 +275,14 @@ static void goodix_ts_report_touch(struct goodix_ts_data *ts, u8 *coor_data) input_y = ts->abs_y_max - input_y; } + /* Inversions have to happen before axis swapping */ + if (ts->inverted_x) + input_x = ts->abs_x_max - input_x; + if (ts->inverted_y) + input_y = ts->abs_y_max - input_y; + if (ts->swapped_x_y) + swap(input_x, input_y); + input_mt_slot(ts->input_dev, id); input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, true); input_report_abs(ts->input_dev, ABS_MT_POSITION_X, input_x); @@ -666,6 +678,8 @@ static void goodix_read_config(struct goodix_ts_data *ts) error); ts->abs_x_max = GOODIX_MAX_WIDTH; ts->abs_y_max = GOODIX_MAX_HEIGHT; + if (ts->swapped_x_y) + swap(ts->abs_x_max, ts->abs_y_max); ts->int_trigger_type = GOODIX_INT_TRIGGER; ts->max_touch_num = GOODIX_MAX_CONTACTS; return; @@ -673,6 +687,8 @@ static void goodix_read_config(struct goodix_ts_data *ts) ts->abs_x_max = get_unaligned_le16(&config[RESOLUTION_LOC]); ts->abs_y_max = get_unaligned_le16(&config[RESOLUTION_LOC + 2]); + if (ts->swapped_x_y) + swap(ts->abs_x_max, ts->abs_y_max); ts->int_trigger_type = config[TRIGGER_LOC] & 0x03; ts->max_touch_num = config[MAX_CONTACTS_LOC] & 0x0f; if (!ts->abs_x_max || !ts->abs_y_max || !ts->max_touch_num) { @@ -680,6 +696,8 @@ static void goodix_read_config(struct goodix_ts_data *ts) "Invalid config, using defaults\n"); ts->abs_x_max = GOODIX_MAX_WIDTH; ts->abs_y_max = GOODIX_MAX_HEIGHT; + if (ts->swapped_x_y) + swap(ts->abs_x_max, ts->abs_y_max); ts->max_touch_num = GOODIX_MAX_CONTACTS; } @@ -950,6 +968,15 @@ static int goodix_ts_probe(struct i2c_client *client, return 0; } +#ifdef CONFIG_OF + ts->swapped_x_y = of_property_read_bool(client->dev.of_node, + "touchscreen-swapped-x-y"); + ts->inverted_x = of_property_read_bool(client->dev.of_node, + "touchscreen-inverted-x"); + ts->inverted_y = of_property_read_bool(client->dev.of_node, + "touchscreen-inverted-y"); +#endif + return goodix_configure_dev(ts); err_free_cfg_name: -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html