Hello, This is the v2 of the older patches from: http://lists.infradead.org/pipermail/linux-arm-kernel/2015-October/374377.html Changes since v1: - The voltage scaling patch (AXP209 PMU regulators) has been already applied by Maxime, so it is not included in this patch set anymore. - A new patch with a separate dts for pcDuino2 has been added, as had been requested during the previous review round. - Instead of removing "usb1_vbus-supply" and "usb2_vbus-supply", they now refer to "reg_vcc5v0" (this had been discussed on IRC). Siarhei Siamashka (3): ARM: dts: sun4i: Allow to use the PH6 pin for GPIO on pcDuino1/2 ARM: sun4i: dt: Add new LinkSprite pcDuino2 board ARM: dts: sun4i: Enable USB DRC on pcDuino1/2 arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/sun4i-a10-pcduino.dts | 29 ++++++++---- arch/arm/boot/dts/sun4i-a10-pcduino2.dts | 78 ++++++++++++++++++++++++++++++++ 3 files changed, 100 insertions(+), 10 deletions(-) create mode 100644 arch/arm/boot/dts/sun4i-a10-pcduino2.dts -- 2.4.9 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html