This series adds support for Marvell berlin4ct pin-controller, allowing to configure the pin muxing from the device tree. Since v2: - introduce new berlin_pinctrl_probe_regmap() to avoid duplicated code - renaming such as s/urt/uart etc. but keep the group name as URT* to keep consistent with HW/ASIC Since v1: - use generic name for pin functions - a new commit to add pinmux for uart0 - correct pinctrl usage in dts Jisheng Zhang (6): pinctrl: berlin: introduce berlin_pinctrl_probe_regmap() pinctrl: berlin: add the berlin4ct pinctrl driver arm64: berlin: add the pinctrl dependency for Marvell Berlin SoCs pinctrl: dt-binding: document berlin4ct SoC pinctrl arm64: dts: berlin4ct: add the pinctrl node arm64: dts: berlin4ct: add default pinmux for uart0 .../devicetree/bindings/pinctrl/berlin,pinctrl.txt | 5 +- arch/arm64/Kconfig.platforms | 1 + arch/arm64/boot/dts/marvell/berlin4ct.dtsi | 22 + drivers/pinctrl/berlin/Kconfig | 5 + drivers/pinctrl/berlin/Makefile | 1 + drivers/pinctrl/berlin/berlin-bg4ct.c | 503 +++++++++++++++++++++ drivers/pinctrl/berlin/berlin.c | 26 +- drivers/pinctrl/berlin/berlin.h | 4 + 8 files changed, 557 insertions(+), 10 deletions(-) create mode 100644 drivers/pinctrl/berlin/berlin-bg4ct.c -- 2.6.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
