Hi,
On 10/01/2015 09:32 AM, Maxime Ripard wrote:
Hi,
On Tue, Sep 29, 2015 at 10:26:37AM +0200, Hans de Goede wrote:
Hi,
On 29-09-15 10:04, Maxime Ripard wrote:
On Tue, Sep 22, 2015 at 03:36:01PM +0200, Hans de Goede wrote:
Enable the otg/drc usb controller on the Bananapi.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
Applied all the other patches but this one.
Thanks, seems you did not push this to your git.kernel.org repo though ?
I think I did, but maybe not at the time you sent the mail.
Since we dropped the patch adding the regulators support on the
Bananapi until we figure out why the board crash, it doesn't compile
anymore.
How about me doing a v2 of the regulators patch which removes the
&cpu0 {
cpu-supply = <®_dcdc2>;
};
So that we do not get cpu voltage scaling, then the regulator
changes should be a NOP, everything should just keep the u-boot
set voltages, and we can enable oth support.
And then when we've figured out a safe way to enable cpu voltage
scaling we can do so with a follow up patch ?
Is that a plan ? If so say yes and I'll do a v2 of these patches :)
Yep, it sounds like a good plan :)
With the new v3 of the regulators patch with the corrected opp-s which
was just send this should no longer be necessary, can you apply the
original "ARM: dts: sun7i: Enable USB DRC on Bananapi" after applying
v3 of the regulators patch please ?
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
