Many OMAP2+ DTS are not using the defined constants to express
the GPIO polarity. Replace these so the DTS are easier to read.
Signed-off-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/omap2420-n8x0-common.dtsi | 6 +++---
arch/arm/boot/dts/omap3-beagle-xm.dts | 2 +-
arch/arm/boot/dts/omap3-beagle.dts | 2 +-
arch/arm/boot/dts/omap3-cm-t3x.dtsi | 2 +-
arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi | 2 +-
arch/arm/boot/dts/omap3-evm-common.dtsi | 4 ++--
arch/arm/boot/dts/omap3-gta04.dtsi | 10 +++++-----
arch/arm/boot/dts/omap3-gta04a5.dts | 2 +-
arch/arm/boot/dts/omap3-ldp.dts | 2 +-
arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 2 +-
arch/arm/boot/dts/omap3-lilly-dbb056.dts | 4 ++--
arch/arm/boot/dts/omap3-n950-n9.dtsi | 2 +-
arch/arm/boot/dts/omap3-overo-base.dtsi | 2 +-
arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi | 2 +-
arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi | 2 +-
arch/arm/boot/dts/omap3-pandora-common.dtsi | 4 ++--
arch/arm/boot/dts/omap3-tao3530.dtsi | 4 ++--
arch/arm/boot/dts/omap3-zoom3.dts | 2 +-
arch/arm/boot/dts/omap4-panda-common.dtsi | 4 ++--
arch/arm/boot/dts/omap4-sdp.dts | 6 +++---
arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi | 2 +-
arch/arm/boot/dts/omap4-var-som-om44.dtsi | 2 +-
arch/arm/boot/dts/omap4460.dtsi | 2 +-
arch/arm/boot/dts/omap5-cm-t54.dts | 2 +-
arch/arm/boot/dts/omap5-uevm.dts | 2 +-
25 files changed, 38 insertions(+), 38 deletions(-)
diff --git a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
index c9f1e93a95ae..8491f46c61b7 100644
--- a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
+++ b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
@@ -9,9 +9,9 @@
ocp {
i2c@0 {
compatible = "i2c-cbus-gpio";
- gpios = <&gpio3 2 0 /* gpio66 clk */
- &gpio3 1 0 /* gpio65 dat */
- &gpio3 0 0 /* gpio64 sel */
+ gpios = <&gpio3 2 GPIO_ACTIVE_HIGH /* gpio66 clk */
+ &gpio3 1 GPIO_ACTIVE_HIGH /* gpio65 dat */
+ &gpio3 0 GPIO_ACTIVE_HIGH /* gpio64 sel */
>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 7c4dca122a91..73f1e3a8f62c 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -80,7 +80,7 @@
regulator-name = "hsusb2_vbus";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&twl_gpio 18 0>; /* GPIO LEDA */
+ gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; /* GPIO LEDA */
startup-delay-us = <70000>;
};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 67659a0ed13e..274c2c482aaa 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -55,7 +55,7 @@
regulator-name = "hsusb2_vbus";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&twl_gpio 18 0>; /* GPIO LEDA */
+ gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; /* GPIO LEDA */
startup-delay-us = <70000>;
};
diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
index 4d091ca43e25..8c813e77b17f 100644
--- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi
+++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
@@ -224,7 +224,7 @@
interrupt-parent = <&gpio2>;
interrupts = <25 0>; /* gpio_57 */
- pendown-gpio = <&gpio2 25 0>;
+ pendown-gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>;
ti,x-min = /bits/ 16 <0x0>;
ti,x-max = /bits/ 16 <0x0fff>;
diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
index e84184de2a4a..4813e96157b3 100644
--- a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
+++ b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi
@@ -54,7 +54,7 @@
interrupt-parent = <&gpio1>;
interrupts = <27 0>; /* gpio_27 */
- pendown-gpio = <&gpio1 27 0>;
+ pendown-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
ti,x-min = /bits/ 16 <0x0>;
ti,x-max = /bits/ 16 <0x0fff>;
diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi
index b2589f96d5f7..090475083c2f 100644
--- a/arch/arm/boot/dts/omap3-evm-common.dtsi
+++ b/arch/arm/boot/dts/omap3-evm-common.dtsi
@@ -26,7 +26,7 @@
regulator-name = "vwl1271";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio5 22 0>; /* gpio150 */
+ gpio = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* gpio150 */
startup-delay-us = <70000>;
enable-active-high;
vin-supply = <&vmmc2>;
@@ -91,7 +91,7 @@
tsc2046@0 {
interrupt-parent = <&gpio6>;
interrupts = <15 0>; /* gpio175 */
- pendown-gpio = <&gpio6 15 0>;
+ pendown-gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
};
};
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index 7166d8876ea8..e14d15e5abc8 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -77,10 +77,10 @@
pinctrl-names = "default";
pinctrl-0 = <&spi_gpio_pins>;
- gpio-sck = <&gpio1 12 0>;
- gpio-miso = <&gpio1 18 0>;
- gpio-mosi = <&gpio1 20 0>;
- cs-gpios = <&gpio1 19 0>;
+ gpio-sck = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ gpio-miso = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+ gpio-mosi = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
num-chipselects = <1>;
/* lcd panel */
@@ -118,7 +118,7 @@
tv_amp: opa362 {
compatible = "ti,opa362";
- enable-gpios = <&gpio1 23 0>;
+ enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
ports {
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/omap3-gta04a5.dts b/arch/arm/boot/dts/omap3-gta04a5.dts
index 52b386f6865b..600b6ca5a1bd 100644
--- a/arch/arm/boot/dts/omap3-gta04a5.dts
+++ b/arch/arm/boot/dts/omap3-gta04a5.dts
@@ -12,6 +12,6 @@
model = "Goldelico GTA04A5";
sound {
- ti,jack-det-gpio = <&twl_gpio 2 0>; /* GTA04A5 only */
+ ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>; /* GTA04A5 only */
};
};
diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts
index bd6e6769c7ce..d2fab8c0d4f8 100644
--- a/arch/arm/boot/dts/omap3-ldp.dts
+++ b/arch/arm/boot/dts/omap3-ldp.dts
@@ -200,7 +200,7 @@
tsc2046@0 {
interrupt-parent = <&gpio2>;
interrupts = <22 0>; /* gpio54 */
- pendown-gpio = <&gpio2 22 0>;
+ pendown-gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;
};
};
diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
index d0dd0365bfda..46f88f86a50b 100644
--- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
+++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
@@ -314,7 +314,7 @@
interrupt-parent = <&gpio1>;
interrupts = <8 0>; /* boot6 / gpio_8 */
spi-max-frequency = <1000000>;
- pendown-gpio = <&gpio1 8 0>;
+ pendown-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
vcc-supply = <®_vcc3>;
pinctrl-names = "default";
pinctrl-0 = <&tsc2048_pins>;
diff --git a/arch/arm/boot/dts/omap3-lilly-dbb056.dts b/arch/arm/boot/dts/omap3-lilly-dbb056.dts
index 834f7c65f62d..0e3c9812f4e3 100644
--- a/arch/arm/boot/dts/omap3-lilly-dbb056.dts
+++ b/arch/arm/boot/dts/omap3-lilly-dbb056.dts
@@ -114,8 +114,8 @@
status = "okay";
bus-width = <4>;
vmmc-supply = <&vmmc1>;
- cd-gpios = <&gpio6 4 0>; /* gpio_164 */
- wp-gpios = <&gpio6 3 0>; /* gpio_163 */
+ cd-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* gpio_164 */
+ wp-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* gpio_163 */
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
ti,dual-volt;
diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
index 800b379d368d..e9ee1df0e467 100644
--- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -27,7 +27,7 @@
regulator-name = "VEMMC";
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <2900000>;
- gpio = <&gpio5 29 0>; /* gpio line 157 */
+ gpio = <&gpio5 29 GPIO_ACTIVE_HIGH>; /* gpio line 157 */
startup-delay-us = <150>;
enable-active-high;
};
diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi
index 28430f1596f2..a29ad16cc9bb 100644
--- a/arch/arm/boot/dts/omap3-overo-base.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-base.dtsi
@@ -35,7 +35,7 @@
regulator-name = "hsusb2_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio6 8 0>; /* gpio_168: vbus enable */
+ gpio = <&gpio6 8 GPIO_ACTIVE_HIGH>; /* gpio_168: vbus enable */
startup-delay-us = <70000>;
enable-active-high;
};
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
index 80d236ac64a5..b09cedf66117 100644
--- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
@@ -152,7 +152,7 @@
interrupt-parent = <&gpio4>;
interrupts = <18 0>; /* gpio_114 */
- pendown-gpio = <&gpio4 18 0>;
+ pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>;
ti,x-min = /bits/ 16 <0x0>;
ti,x-max = /bits/ 16 <0x0fff>;
diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
index 048fd216970a..5f979590571b 100644
--- a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi
@@ -163,7 +163,7 @@
interrupt-parent = <&gpio4>;
interrupts = <18 0>; /* gpio_114 */
- pendown-gpio = <&gpio4 18 0>;
+ pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>;
ti,x-min = /bits/ 16 <0x0>;
ti,x-max = /bits/ 16 <0x0fff>;
diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi
index f2084e6d01e7..cfe140c657e7 100644
--- a/arch/arm/boot/dts/omap3-pandora-common.dtsi
+++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi
@@ -218,7 +218,7 @@
regulator-always-on;
regulator-boot-on;
enable-active-high;
- gpio = <&gpio6 4 0>; /* GPIO_164 */
+ gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* GPIO_164 */
};
/* wg7210 (wifi+bt module) 32k clock buffer */
@@ -607,7 +607,7 @@
pinctrl-0 = <&penirq_pins>;
interrupt-parent = <&gpio3>;
interrupts = <30 0>; /* GPIO_94 */
- pendown-gpio = <&gpio3 30 0>;
+ pendown-gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
vcc-supply = <&vaux4>;
ti,x-min = /bits/ 16 <0>;
diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi
index 7bd8d9a4f67f..ae5dbbd9d569 100644
--- a/arch/arm/boot/dts/omap3-tao3530.dtsi
+++ b/arch/arm/boot/dts/omap3-tao3530.dtsi
@@ -37,7 +37,7 @@
regulator-name = "hsusb2_vbus";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&twl_gpio 18 0>; /* GPIO LEDA */
+ gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; /* GPIO LEDA */
startup-delay-us = <70000>;
};
@@ -225,7 +225,7 @@
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&vmmc1>;
vmmc_aux-supply = <&vsim>;
- cd-gpios = <&twl_gpio 0 0>;
+ cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_HIGH>;
bus-width = <8>;
};
diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts
index 131448d86e67..7bc5fdd6981e 100644
--- a/arch/arm/boot/dts/omap3-zoom3.dts
+++ b/arch/arm/boot/dts/omap3-zoom3.dts
@@ -44,7 +44,7 @@
regulator-name = "vwl1271";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio4 5 0>; /* gpio101 */
+ gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */
startup-delay-us = <70000>;
enable-active-high;
};
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index f1507bc8737e..18d096696fc0 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -68,7 +68,7 @@
regulator-name = "hsusb1_vbus";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio1 1 0>; /* gpio_1 */
+ gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; /* gpio_1 */
startup-delay-us = <70000>;
enable-active-high;
/*
@@ -98,7 +98,7 @@
regulator-name = "vwl1271";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio2 11 0>;
+ gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
startup-delay-us = <70000>;
enable-active-high;
};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index dac86ed7481f..f0bdc41f8eff 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -30,7 +30,7 @@
regulator-name = "VDD_ETH";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 16 0>; /* gpio line 48 */
+ gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>; /* gpio line 48 */
enable-active-high;
regulator-boot-on;
};
@@ -155,7 +155,7 @@
regulator-name = "vwl1271";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio2 22 0>;
+ gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;
startup-delay-us = <70000>;
enable-active-high;
};
@@ -374,7 +374,7 @@
/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
- ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */
+ ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio line 127 */
vio-supply = <&v1v8>;
v2v1-supply = <&v2v1>;
diff --git a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
index 9bceeb7e1f03..1c5f6f35e1cf 100644
--- a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
+++ b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
@@ -15,7 +15,7 @@
regulator-name = "vwl1271";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio2 11 0>; /* gpio 43 */
+ gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; /* gpio 43 */
startup-delay-us = <70000>;
enable-active-high;
};
diff --git a/arch/arm/boot/dts/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/omap4-var-som-om44.dtsi
index a4f1ba2e1903..49d032b846be 100644
--- a/arch/arm/boot/dts/omap4-var-som-om44.dtsi
+++ b/arch/arm/boot/dts/omap4-var-som-om44.dtsi
@@ -196,7 +196,7 @@
/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
- ti,audpwron-gpio = <&gpio6 22 0>; /* gpio 182 */
+ ti,audpwron-gpio = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio 182 */
vio-supply = <&v1v8>;
v2v1-supply = <&v2v1>;
diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi
index 194f9ef0a009..5fa68f191af7 100644
--- a/arch/arm/boot/dts/omap4460.dtsi
+++ b/arch/arm/boot/dts/omap4460.dtsi
@@ -46,7 +46,7 @@
0x4a002378 0x18>;
compatible = "ti,omap4460-bandgap";
interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; /* talert */
- gpios = <&gpio3 22 0>; /* tshut */
+ gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; /* tshut */
#thermal-sensor-cells = <0>;
};
diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts
index 61ad2ea34720..3774b37be6c8 100644
--- a/arch/arm/boot/dts/omap5-cm-t54.dts
+++ b/arch/arm/boot/dts/omap5-cm-t54.dts
@@ -344,7 +344,7 @@
interrupt-parent = <&gpio1>;
interrupts = <15 0>; /* gpio1_wk15 */
- pendown-gpio = <&gpio1 15 0>;
+ pendown-gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
ti,x-min = /bits/ 16 <0x0>;
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 3cb030f9d2c4..4da9e52f147b 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -527,7 +527,7 @@
pinctrl-0 = <&twl6040_pins>;
interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */
- ti,audpwron-gpio = <&gpio5 13 0>; /* gpio line 141 */
+ ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>; /* gpio line 141 */
vio-supply = <&smps7_reg>;
v2v1-supply = <&smps9_reg>;
--
2.4.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
