Hi Maxime, On 01/10/15 21:45, Maxime Ripard wrote: > On Thu, Oct 01, 2015 at 09:47:11AM +0100, Ian Campbell wrote: >> Booting a recent kernel with the DTB supplied with Debian Jessie (3.16 >> based) breaks on Cubietruck because that DTB lacks the clock-indices nodes >> which the new driver from the commit below adds (replacing the hardcoding >> which used to be in clk-sunxi.c). >> >> It is panicing in drivers/clocksource/timer-sun5i.c with: >> >> [ 0.015413] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns >> [ 0.025049] Kernel panic - not syncing: Can't get timer clock >> [ 0.030794] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.3.0-rc2-arm-native+ #6 >> [ 0.038002] Hardware name: Allwinner sun7i (A20) Family >> [ 0.043253] [<c0219794>] (unwind_backtrace) from [<c0214e44>] (show_stack+0x10/0x14) >> [ 0.050992] [<c0214e44>] (show_stack) from [<c048159c>] (dump_stack+0x88/0x98) >> [ 0.058213] [<c048159c>] (dump_stack) from [<c02caa98>] (panic+0xa4/0x22c) >> [ 0.065090] [<c02caa98>] (panic) from [<c0d7c518>] (sun5i_timer_init+0x80/0x384) >> [ 0.072482] [<c0d7c518>] (sun5i_timer_init) from [<c0d7aad0>] (clocksource_of_init+0x4c/0x8c) >> [ 0.081001] [<c0d7aad0>] (clocksource_of_init) from [<c0d39b48>] (start_kernel+0x28c/0x3c4) >> [ 0.089343] [<c0d39b48>] (start_kernel) from [<4020807c>] (0x4020807c) >> [ 0.095866] ---[ end Kernel panic - not syncing: Can't get timer clock >> >> Reverting ee38b2698ae2 fixes this specific issue for me (it boots further, >> but there seems to be other problems later when earlycon hands over to >> proper console, which I've not yet looked into). >> >> Is this considered acceptable linkage between the kernel and the dtbs? >> >> I suspect that even if anyone does care this is going to be an uphill >> struggle for that minority so I'm going to adjust our test infrastructure >> to pickup the dtbs from the kernel it is trying to test rather then reusing >> the one from the OS install. > > It's never been something we supported (or even claim to support), so > it's actually surprising that it's the only commit that need to be > reverted, but yeah, you should keep your DTB in sync. I would have though the bindings are stable, i.e the compatibility with old DT would have been kept in newer kernel. So is it something specific to cubietruck? If no, that's very unfortunate because it means that you can't re-use the same DT across multiple OS and the DT provided by the firmware (if it's built-in). Regards, -- Julien Grall -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html