From: Ariel D'Alessandro <ariel@xxxxxxxxxxxxxxxxxxxx>
Add the I2C0 bus and the some of the I2C devices on the Hitex
LPC4350 eval board.
Signed-off-by: Ariel D'Alessandro <ariel@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Joachim Eastwood <manabian@xxxxxxxxx>
---
arch/arm/boot/dts/lpc4350-hitex-eval.dts | 33 ++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm/boot/dts/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/lpc4350-hitex-eval.dts
index c1dd76e5fc45..5c529f45947b 100644
--- a/arch/arm/boot/dts/lpc4350-hitex-eval.dts
+++ b/arch/arm/boot/dts/lpc4350-hitex-eval.dts
@@ -186,6 +186,14 @@
};
};
+ i2c0_pins: i2c0-pins {
+ i2c0_pins_cfg {
+ pins = "i2c0_scl", "i2c0_sda";
+ function = "i2c0";
+ input-enable;
+ };
+ };
+
spifi_pins: spifi-pins {
spifi_clk_cfg {
pins = "p3_3";
@@ -300,6 +308,31 @@
clock-frequency = <25000000>;
};
+&i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ clock-frequency = <400000>;
+
+ /* NXP SE97BTP with temperature sensor + eeprom */
+ sensor@18 {
+ compatible = "nxp,jc42";
+ reg = <0x18>;
+ };
+
+ eeprom@50 {
+ compatible = "nxp,24c02";
+ reg = <0x50>;
+ };
+
+ pca_gpio: gpio@24 {
+ compatible = "nxp,pca9673";
+ reg = <0x24>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
&mac {
status = "okay";
phy-mode = "mii";
--
1.8.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
