The TPS65912 PMIC contains several regulators and a GPIO controller.
Add bindings for the TPS65912 PMIC.
Signed-off-by: Andrew F. Davis <afd@xxxxxx>
---
.../devicetree/bindings/gpio/gpio-tps65912.txt | 16 +++++++
Documentation/devicetree/bindings/mfd/tps65912.txt | 51 ++++++++++++++++++++++
.../bindings/regulator/tps65912-regulator.txt | 28 ++++++++++++
3 files changed, 95 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-tps65912.txt
create mode 100644 Documentation/devicetree/bindings/mfd/tps65912.txt
create mode 100644 Documentation/devicetree/bindings/regulator/tps65912-regulator.txt
diff --git a/Documentation/devicetree/bindings/gpio/gpio-tps65912.txt b/Documentation/devicetree/bindings/gpio/gpio-tps65912.txt
new file mode 100644
index 0000000..0c5c05c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-tps65912.txt
@@ -0,0 +1,16 @@
+* TPS65912 GPIO Controller bindings
+
+Required properties:
+ - compatible : Should be "ti,tps65912-gpio".
+ - gpio-controller : Marks the device node as a GPIO Controller.
+ - #gpio-cells : Should be two. The first cell is the pin number and
+ the second cell is used to specify flags.
+ See include/dt-bindings/gpio/gpio.h for possible values.
+
+Example:
+
+ gpio4: tps65912_gpio {
+ compatible = "ti,tps65912-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/mfd/tps65912.txt b/Documentation/devicetree/bindings/mfd/tps65912.txt
new file mode 100644
index 0000000..da5804a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/tps65912.txt
@@ -0,0 +1,51 @@
+* TPS65912 Power Management Integrated Circuit bindings
+
+Required properties:
+ - compatible : Should be "ti,tps65912".
+ - reg : Slave address or chip select number (I2C / SPI).
+ - interrupt-parent : The parent interrupt controller.
+ - interrupts : The interrupt line the device is connected to.
+ - interrupt-controller : Marks the device node as an interrupt controller.
+ - #interrupt-cells: The number of cells to describe an IRQ, this should be 2.
+ The first cell is the IRQ number.
+ The second cell is the flags, encoded as the trigger masks from
+ ../interrupt-controller/interrupts.txt
+
+Additional nodes defined in:
+ - Regulators: ../regulator/tps65912-regulator.txt
+ - GPIO: ../gpio/gpio-tps65912.txt.
+
+Example:
+
+ pmic: tps65912@2d {
+ compatible = "ti,tps65912";
+ reg = <0x2d>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ regulators {
+ compatible = "ti,tps65912-regulator";
+
+ dcdc1 {
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <1144000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1 {
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <1900000>;
+ };
+ };
+
+ gpio4: tps65912_gpio {
+ compatible = "ti,tps65912-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/tps65912-regulator.txt b/Documentation/devicetree/bindings/regulator/tps65912-regulator.txt
new file mode 100644
index 0000000..4cd05fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/tps65912-regulator.txt
@@ -0,0 +1,28 @@
+* TPS65912 regulator bindings
+
+Required properties:
+ - compatible: "ti,tps65912-regulator"
+ - list of regulators provided by this controller, must be named
+ after their hardware counterparts: dcdc[1-4] and ldo[1-10]
+
+Each regulator is defined using the standard binding for regulators.
+
+Example:
+
+ tps65912_regulator {
+ compatible = "ti,tps65912-regulator";
+
+ dcdc1 {
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <1144000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1 {
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1900000>;
+ regulator-max-microvolt = <1900000>;
+ };
+ };
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
