On 29/09/15 04:01, Chunfeng Yun wrote:
There some vendor quirks for MTK xhci host controller:
1. It defines some extra SW scheduling parameters for HW
to minimize the scheduling effort for synchronous and
interrupt endpoints. The parameters are put into reseved
DWs of slot context and endpoint context.
2. Its IMODI unit for Interrupter Moderation register is
8 times as much as that defined in xHCI spec.
3. Its TDS in Normal TRB defines a number of packets that
remains to be transferred for a TD after processing all
Max packets in all previous TRBs.
Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
I've done some basic soak tests, both with a directly attached USB3 HDD
and, given the extra code to manage isochronous xfer, also with a hub,
disc and two audio interfaces.
Tested-by: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 57f40a1..243f696 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -68,6 +68,7 @@
#include <linux/slab.h>
#include "xhci.h"
#include "xhci-trace.h"
+#include "xhci-mtk.h"
/*
* Returns zero if the TRB isn't in this segment, otherwise it returns the DMA
@@ -3044,18 +3045,27 @@ static u32 xhci_td_remainder(struct xhci_hcd *xhci, int transferred,
struct urb *urb, unsigned int num_trbs_left)
{
u32 maxp, total_packet_count;
+ u32 skip_current_trb = 0;
A bit of a nitpick but why do we need skip_current_trb? Testing
(xhci->quirks & XHCI_MTK_HOST) twice would make what the code does, and
why, more obvious.
Anyhow with that looked at, and the caveat that I'm not much of USB
expert, you're welcome to add my Reviewed-by: to v10.
- if (xhci->hci_version < 0x100)
- return ((td_total_len - transferred) >> 10);
-
- maxp = GET_MAX_PACKET(usb_endpoint_maxp(&urb->ep->desc));
- total_packet_count = DIV_ROUND_UP(td_total_len, maxp);
+ if (xhci->hci_version < 0x100) {
+ /* for MTK xHCI, TD size doesn't include this TRB */
+ if (xhci->quirks & XHCI_MTK_HOST)
+ skip_current_trb = 1;
+ else
+ return ((td_total_len - transferred) >> 10);
+ }
/* One TRB with a zero-length data packet. */
if (num_trbs_left == 0 || (transferred == 0 && trb_buff_len == 0) ||
trb_buff_len == td_total_len)
return 0;
+ if (skip_current_trb)
+ trb_buff_len = 0;
+
+ maxp = GET_MAX_PACKET(usb_endpoint_maxp(&urb->ep->desc));
+ total_packet_count = DIV_ROUND_UP(td_total_len, maxp);
+
/* Queueing functions don't count the current TRB into transferred */
return (total_packet_count - ((transferred + trb_buff_len) / maxp));
}
Daniel.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
