Add the "fsl,wake-on-filer" property for eTSEC nodes to indicate that the system has the power management infrastructure needed to be able to wake up the system via FGPI (filer, aka. h/w rx parser) interrupt. Cc: Li Yang <leoli@xxxxxxxxxxxxx> Cc: Zhao Chenhui <chenhui.zhao@xxxxxxxxxxxxx> Signed-off-by: Claudiu Manoil <claudiu.manoil@xxxxxxxxxxxxx> --- Documentation/devicetree/bindings/net/fsl-tsec-phy.txt | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt index 1e97532..db74f0d 100644 --- a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt +++ b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt @@ -57,6 +57,10 @@ Properties: "rgmii-id", as all other connection types are detected by hardware. - fsl,magic-packet : If present, indicates that the hardware supports waking up via magic packet. + - fsl,wake-on-filer : If present, indicates that the hardware supports + waking up by Filer General Purpose Interrupt (FGPI) asserted on the + Rx int line. This is an advanced power management capability allowing + certain packet types (user) defined by filer rules to wake up the system. - bd-stash : If present, indicates that the hardware supports stashing buffer descriptors in the L2. - rx-stash-len : Denotes the number of bytes of a received buffer to stash -- 1.7.11.7 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html