Add device tree binding documentation for serial flash with
Mediatek serial flash controller
Signed-off-by: Bayi Cheng <bayi.cheng@xxxxxxxxxxxx>
---
.../devicetree/bindings/mtd/mtk-quadspi.txt | 30 ++++++++++++++++++++++
1 file changed, 30 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
diff --git a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
new file mode 100644
index 0000000..8fff0ed
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
@@ -0,0 +1,30 @@
+* MTD SPI nor driver for MTK MT81xx (and similar) serial flash controller
+
+Required properties:
+- compatible: should be "mediatek,mt8173-nor";
+- reg: physical base address and length of the controller's register
+- clocks: the phandle of the clock needed by the nor controller
+- clock-names: the name of the clocks
+ the clocks needed "spi" and "sf". "spi" is used for spi bus,
+ and "sf" is used for controller, these are the clocks witch
+ hardware needs to enabling nor flash and nor flash controller.
+ See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
+- #address-cells: should be <1>
+- #size-cells: should be <0>
+
+Example:
+
+nor_flash: spi@1100d000 {
+ compatible = "mediatek,mt8173-nor";
+ reg = <0 0x1100d000 0 0xe0>;
+ clocks = <&pericfg CLK_PERI_SPI>,
+ <&topckgen CLK_TOP_SPINFI_IFR_SEL>;
+ clock-names = "spi", "sf";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ flash@0 {
+ ....
+ };
+};
+
--
1.8.1.1.dirty
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
