On 30/09/15 13:32, Arun Parameswaran wrote:
> Add device tree binding documentation for the Broadcom iProc MDIO
> bus driver.
>
> Signed-off-by: Arun Parameswaran <arunp@xxxxxxxxxxxx>
> ---
> .../devicetree/bindings/net/brcm,iproc-mdio.txt | 23 ++++++++++++++++++++++
> 1 file changed, 23 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt
>
> diff --git a/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt b/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt
> new file mode 100644
> index 0000000..689f97c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt
> @@ -0,0 +1,23 @@
> +* Broadcom iProc MDIO bus controller
> +
> +Required properties:
> +- compatible: should be "brcm,iproc-mdio"
> +- reg: address and length of the register set for the MDIO interface
> +- #size-cells: must be 1
> +- #address-cells: must be 0
> +
> +Child nodes of this MDIO bus controller node are standard Ethernet PHY device
> +nodes as described in Documentation/devicetree/bindings/net/phy.txt
> +
> +Example:
> +
> +mdio@0x18002000 {
Sorry for not catching this earlier, you might want to drop the leading
0x here from your example, other than that:
Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
--
Florian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
