[PATCH 3/4] net: phy: Add Broadcom phy library for common interfaces

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




This patch adds the Broadcom phy library to consolidate common
interfaces shared by Broadcom phy's.

Moved the common interfaces to the 'bcm-phy-lib.c' and updated
the Broadcom PHY drivers to use the new APIs.

Signed-off-by: Arun Parameswaran <arunp@xxxxxxxxxxxx>
---
 drivers/net/phy/Kconfig       |   6 ++
 drivers/net/phy/Makefile      |   1 +
 drivers/net/phy/bcm-phy-lib.c | 209 ++++++++++++++++++++++++++++++++++++++++++
 drivers/net/phy/bcm-phy-lib.h |  37 ++++++++
 drivers/net/phy/bcm63xx.c     |  38 +-------
 drivers/net/phy/bcm7xxx.c     | 127 ++++++-------------------
 drivers/net/phy/broadcom.c    | 149 +++++++++---------------------
 include/linux/brcmphy.h       |  22 +----
 8 files changed, 333 insertions(+), 256 deletions(-)
 create mode 100644 drivers/net/phy/bcm-phy-lib.c
 create mode 100644 drivers/net/phy/bcm-phy-lib.h

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index b57f6c2..0c85a01 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -69,8 +69,12 @@ config SMSC_PHY
 	---help---
 	  Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
 
+config BCM_NET_PHYLIB
+	bool
+
 config BROADCOM_PHY
 	tristate "Drivers for Broadcom PHYs"
+	select BCM_NET_PHYLIB
 	---help---
 	  Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
 	  BCM5481 and BCM5482 PHYs.
@@ -78,11 +82,13 @@ config BROADCOM_PHY
 config BCM63XX_PHY
 	tristate "Drivers for Broadcom 63xx SOCs internal PHY"
 	depends on BCM63XX
+	select BCM_NET_PHYLIB
 	---help---
 	  Currently supports the 6348 and 6358 PHYs.
 
 config BCM7XXX_PHY
 	tristate "Drivers for Broadcom 7xxx SOCs internal PHYs"
+	select BCM_NET_PHYLIB
 	---help---
 	  Currently supports the BCM7366, BCM7439, BCM7445, and
 	  40nm and 65nm generation of BCM7xxx Set Top Box SoCs.
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index f4e6eb9..6932475 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_QSEMI_PHY)		+= qsemi.o
 obj-$(CONFIG_SMSC_PHY)		+= smsc.o
 obj-$(CONFIG_TERANETICS_PHY)	+= teranetics.o
 obj-$(CONFIG_VITESSE_PHY)	+= vitesse.o
+obj-$(CONFIG_BCM_NET_PHYLIB)	+= bcm-phy-lib.o
 obj-$(CONFIG_BROADCOM_PHY)	+= broadcom.o
 obj-$(CONFIG_BCM63XX_PHY)	+= bcm63xx.o
 obj-$(CONFIG_BCM7XXX_PHY)	+= bcm7xxx.o
diff --git a/drivers/net/phy/bcm-phy-lib.c b/drivers/net/phy/bcm-phy-lib.c
new file mode 100644
index 0000000..13e161e
--- /dev/null
+++ b/drivers/net/phy/bcm-phy-lib.c
@@ -0,0 +1,209 @@
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "bcm-phy-lib.h"
+#include <linux/brcmphy.h>
+#include <linux/export.h>
+#include <linux/mdio.h>
+#include <linux/phy.h>
+
+#define MII_BCM_CHANNEL_WIDTH     0x2000
+#define BCM_CL45VEN_EEE_ADV       0x3c
+
+int bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val)
+{
+	int rc;
+
+	rc = phy_write(phydev, MII_BCM54XX_EXP_SEL, reg);
+	if (rc < 0)
+		return rc;
+
+	return phy_write(phydev, MII_BCM54XX_EXP_DATA, val);
+}
+EXPORT_SYMBOL_GPL(bcm_phy_write_exp);
+
+int bcm_phy_read_exp(struct phy_device *phydev, u16 reg)
+{
+	int val;
+
+	val = phy_write(phydev, MII_BCM54XX_EXP_SEL, reg);
+	if (val < 0)
+		return val;
+
+	val = phy_read(phydev, MII_BCM54XX_EXP_DATA);
+
+	/* Restore default value.  It's O.K. if this write fails. */
+	phy_write(phydev, MII_BCM54XX_EXP_SEL, 0);
+
+	return val;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_read_exp);
+
+int bcm_phy_write_misc(struct phy_device *phydev,
+		       u16 reg, u16 chl, u16 val)
+{
+	int rc;
+	int tmp;
+
+	rc = phy_write(phydev, MII_BCM54XX_AUX_CTL,
+		       MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
+	if (rc < 0)
+		return rc;
+
+	tmp = phy_read(phydev, MII_BCM54XX_AUX_CTL);
+	tmp |= MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA;
+	rc = phy_write(phydev, MII_BCM54XX_AUX_CTL, tmp);
+	if (rc < 0)
+		return rc;
+
+	tmp = (chl * MII_BCM_CHANNEL_WIDTH) | reg;
+	rc = bcm_phy_write_exp(phydev, tmp, val);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_write_misc);
+
+int bcm_phy_read_misc(struct phy_device *phydev,
+		      u16 reg, u16 chl)
+{
+	int rc;
+	int tmp;
+
+	rc = phy_write(phydev, MII_BCM54XX_AUX_CTL,
+		       MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
+	if (rc < 0)
+		return rc;
+
+	tmp = phy_read(phydev, MII_BCM54XX_AUX_CTL);
+	tmp |= MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA;
+	rc = phy_write(phydev, MII_BCM54XX_AUX_CTL, tmp);
+	if (rc < 0)
+		return rc;
+
+	tmp = (chl * MII_BCM_CHANNEL_WIDTH) | reg;
+	rc = bcm_phy_read_exp(phydev, tmp);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_read_misc);
+
+int bcm_phy_ack_intr(struct phy_device *phydev)
+{
+	int reg;
+
+	/* Clear pending interrupts.  */
+	reg = phy_read(phydev, MII_BCM54XX_ISR);
+	if (reg < 0)
+		return reg;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_ack_intr);
+
+int bcm_phy_config_intr(struct phy_device *phydev)
+{
+	int reg;
+
+	reg = phy_read(phydev, MII_BCM54XX_ECR);
+	if (reg < 0)
+		return reg;
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+		reg &= ~MII_BCM54XX_ECR_IM;
+	else
+		reg |= MII_BCM54XX_ECR_IM;
+
+	return phy_write(phydev, MII_BCM54XX_ECR, reg);
+}
+EXPORT_SYMBOL_GPL(bcm_phy_config_intr);
+
+int bcm_phy_read_shadow(struct phy_device *phydev, u16 shadow)
+{
+	phy_write(phydev, MII_BCM54XX_SHD, MII_BCM54XX_SHD_VAL(shadow));
+	return MII_BCM54XX_SHD_DATA(phy_read(phydev, MII_BCM54XX_SHD));
+}
+EXPORT_SYMBOL_GPL(bcm_phy_read_shadow);
+
+int bcm_phy_write_shadow(struct phy_device *phydev, u16 shadow,
+			 u16 val)
+{
+	return phy_write(phydev, MII_BCM54XX_SHD,
+			 MII_BCM54XX_SHD_WRITE |
+			 MII_BCM54XX_SHD_VAL(shadow) |
+			 MII_BCM54XX_SHD_DATA(val));
+}
+EXPORT_SYMBOL_GPL(bcm_phy_write_shadow);
+
+int bcm_phy_enable_apd(struct phy_device *phydev, bool dll_pwr_down)
+{
+	int val;
+
+	if (dll_pwr_down) {
+		val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_SCR3);
+		if (val < 0)
+			return val;
+
+		val |= BCM54XX_SHD_SCR3_DLLAPD_DIS;
+		bcm_phy_write_shadow(phydev, BCM54XX_SHD_SCR3, val);
+	}
+
+	val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_APD);
+	if (val < 0)
+		return val;
+
+	/* Clear APD bits */
+	val &= BCM_APD_CLR_MASK;
+
+	if (phydev->autoneg == AUTONEG_ENABLE)
+		val |= BCM54XX_SHD_APD_EN;
+	else
+		val |= BCM_NO_ANEG_APD_EN;
+
+	/* Enable energy detect single link pulse for easy wakeup */
+	val |= BCM_APD_SINGLELP_EN;
+
+	/* Enable Auto Power-Down (APD) for the PHY */
+	return bcm_phy_write_shadow(phydev, BCM54XX_SHD_APD, val);
+}
+EXPORT_SYMBOL_GPL(bcm_phy_enable_apd);
+
+int bcm_phy_enable_eee(struct phy_device *phydev)
+{
+	int val;
+
+	/* Enable EEE at PHY level */
+	val = phy_read_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL,
+				    MDIO_MMD_AN, phydev->addr);
+	if (val < 0)
+		return val;
+
+	val |= LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X;
+
+	phy_write_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL,
+			       MDIO_MMD_AN,  phydev->addr, (u32)val);
+
+	/* Advertise EEE */
+	val = phy_read_mmd_indirect(phydev, BCM_CL45VEN_EEE_ADV,
+				    MDIO_MMD_AN, phydev->addr);
+	if (val < 0)
+		return val;
+
+	val |= (MDIO_AN_EEE_ADV_100TX | MDIO_AN_EEE_ADV_1000T);
+
+	phy_write_mmd_indirect(phydev, BCM_CL45VEN_EEE_ADV,
+			       MDIO_MMD_AN,  phydev->addr, (u32)val);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(bcm_phy_enable_eee);
+
diff --git a/drivers/net/phy/bcm-phy-lib.h b/drivers/net/phy/bcm-phy-lib.h
new file mode 100644
index 0000000..b2091c8
--- /dev/null
+++ b/drivers/net/phy/bcm-phy-lib.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _LINUX_BCM_PHY_LIB_H
+#define _LINUX_BCM_PHY_LIB_H
+
+#include <linux/phy.h>
+
+int bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val);
+int bcm_phy_read_exp(struct phy_device *phydev, u16 reg);
+
+int bcm_phy_write_misc(struct phy_device *phydev,
+		       u16 reg, u16 chl, u16 value);
+int bcm_phy_read_misc(struct phy_device *phydev,
+		      u16 reg, u16 chl);
+
+int bcm_phy_write_shadow(struct phy_device *phydev, u16 shadow,
+			 u16 val);
+int bcm_phy_read_shadow(struct phy_device *phydev, u16 shadow);
+
+int bcm_phy_ack_intr(struct phy_device *phydev);
+int bcm_phy_config_intr(struct phy_device *phydev);
+
+int bcm_phy_enable_apd(struct phy_device *phydev, bool dll_pwr_down);
+
+int bcm_phy_enable_eee(struct phy_device *phydev);
+#endif /* _LINUX_BCM_PHY_LIB_H */
diff --git a/drivers/net/phy/bcm63xx.c b/drivers/net/phy/bcm63xx.c
index 830ec31..86b2805 100644
--- a/drivers/net/phy/bcm63xx.c
+++ b/drivers/net/phy/bcm63xx.c
@@ -6,6 +6,7 @@
  *	as published by the Free Software Foundation; either version
  *	2 of the License, or (at your option) any later version.
  */
+#include "bcm-phy-lib.h"
 #include <linux/module.h>
 #include <linux/phy.h>
 
@@ -42,35 +43,6 @@ static int bcm63xx_config_init(struct phy_device *phydev)
 	return phy_write(phydev, MII_BCM63XX_IR, reg);
 }
 
-static int bcm63xx_ack_interrupt(struct phy_device *phydev)
-{
-	int reg;
-
-	/* Clear pending interrupts.  */
-	reg = phy_read(phydev, MII_BCM63XX_IR);
-	if (reg < 0)
-		return reg;
-
-	return 0;
-}
-
-static int bcm63xx_config_intr(struct phy_device *phydev)
-{
-	int reg, err;
-
-	reg = phy_read(phydev, MII_BCM63XX_IR);
-	if (reg < 0)
-		return reg;
-
-	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
-		reg &= ~MII_BCM63XX_IR_GMASK;
-	else
-		reg |= MII_BCM63XX_IR_GMASK;
-
-	err = phy_write(phydev, MII_BCM63XX_IR, reg);
-	return err;
-}
-
 static struct phy_driver bcm63xx_driver[] = {
 {
 	.phy_id		= 0x00406000,
@@ -82,8 +54,8 @@ static struct phy_driver bcm63xx_driver[] = {
 	.config_init	= bcm63xx_config_init,
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
-	.ack_interrupt	= bcm63xx_ack_interrupt,
-	.config_intr	= bcm63xx_config_intr,
+	.ack_interrupt	= bcm_phy_ack_intr,
+	.config_intr	= bcm_phy_config_intr,
 	.driver		= { .owner = THIS_MODULE },
 }, {
 	/* same phy as above, with just a different OUI */
@@ -95,8 +67,8 @@ static struct phy_driver bcm63xx_driver[] = {
 	.config_init	= bcm63xx_config_init,
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
-	.ack_interrupt	= bcm63xx_ack_interrupt,
-	.config_intr	= bcm63xx_config_intr,
+	.ack_interrupt	= bcm_phy_ack_intr,
+	.config_intr	= bcm_phy_config_intr,
 	.driver		= { .owner = THIS_MODULE },
 } };
 
diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index 6b701b3..efa31a6 100644
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -12,12 +12,12 @@
 #include <linux/module.h>
 #include <linux/phy.h>
 #include <linux/delay.h>
+#include "bcm-phy-lib.h"
 #include <linux/bitops.h>
 #include <linux/brcmphy.h>
 #include <linux/mdio.h>
 
 /* Broadcom BCM7xxx internal PHY registers */
-#define MII_BCM7XXX_CHANNEL_WIDTH	0x2000
 
 /* 40nm only register definitions */
 #define MII_BCM7XXX_100TX_AUX_CTL	0x10
@@ -48,37 +48,13 @@
 
 #define CORE_EXPB0			0xb0
 
-static void phy_write_exp(struct phy_device *phydev,
-					u16 reg, u16 value)
-{
-	phy_write(phydev, MII_BCM54XX_EXP_SEL, MII_BCM54XX_EXP_SEL_ER | reg);
-	phy_write(phydev, MII_BCM54XX_EXP_DATA, value);
-}
-
-static void phy_write_misc(struct phy_device *phydev,
-					u16 reg, u16 chl, u16 value)
-{
-	int tmp;
-
-	phy_write(phydev, MII_BCM54XX_AUX_CTL, MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
-
-	tmp = phy_read(phydev, MII_BCM54XX_AUX_CTL);
-	tmp |= MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA;
-	phy_write(phydev, MII_BCM54XX_AUX_CTL, tmp);
-
-	tmp = (chl * MII_BCM7XXX_CHANNEL_WIDTH) | reg;
-	phy_write(phydev, MII_BCM54XX_EXP_SEL, tmp);
-
-	phy_write(phydev, MII_BCM54XX_EXP_DATA, value);
-}
-
 static void r_rc_cal_reset(struct phy_device *phydev)
 {
 	/* Reset R_CAL/RC_CAL Engine */
-	phy_write_exp(phydev, 0x00b0, 0x0010);
+	bcm_phy_write_exp(phydev, 0x00b0, 0x0010);
 
 	/* Disable Reset R_AL/RC_CAL Engine */
-	phy_write_exp(phydev, 0x00b0, 0x0000);
+	bcm_phy_write_exp(phydev, 0x00b0, 0x0000);
 }
 
 static int bcm7xxx_28nm_b0_afe_config_init(struct phy_device *phydev)
@@ -86,18 +62,18 @@ static int bcm7xxx_28nm_b0_afe_config_init(struct phy_device *phydev)
 	/* Increase VCO range to prevent unlocking problem of PLL at low
 	 * temp
 	 */
-	phy_write_misc(phydev, PLL_PLLCTRL_1, 0x0048);
+	bcm_phy_write_misc(phydev, PLL_PLLCTRL_1, 0x0048);
 
 	/* Change Ki to 011 */
-	phy_write_misc(phydev, PLL_PLLCTRL_2, 0x021b);
+	bcm_phy_write_misc(phydev, PLL_PLLCTRL_2, 0x021b);
 
 	/* Disable loading of TVCO buffer to bandgap, set bandgap trim
 	 * to 111
 	 */
-	phy_write_misc(phydev, PLL_PLLCTRL_4, 0x0e20);
+	bcm_phy_write_misc(phydev, PLL_PLLCTRL_4, 0x0e20);
 
 	/* Adjust bias current trim by -3 */
-	phy_write_misc(phydev, DSP_TAP10, 0x690b);
+	bcm_phy_write_misc(phydev, DSP_TAP10, 0x690b);
 
 	/* Switch to CORE_BASE1E */
 	phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0xd);
@@ -105,19 +81,19 @@ static int bcm7xxx_28nm_b0_afe_config_init(struct phy_device *phydev)
 	r_rc_cal_reset(phydev);
 
 	/* write AFE_RXCONFIG_0 */
-	phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb19);
+	bcm_phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb19);
 
 	/* write AFE_RXCONFIG_1 */
-	phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9a3f);
+	bcm_phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9a3f);
 
 	/* write AFE_RX_LP_COUNTER */
-	phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0);
+	bcm_phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0);
 
 	/* write AFE_HPF_TRIM_OTHERS */
-	phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x000b);
+	bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x000b);
 
 	/* write AFTE_TX_CONFIG */
-	phy_write_misc(phydev, AFE_TX_CONFIG, 0x0800);
+	bcm_phy_write_misc(phydev, AFE_TX_CONFIG, 0x0800);
 
 	return 0;
 }
@@ -125,36 +101,36 @@ static int bcm7xxx_28nm_b0_afe_config_init(struct phy_device *phydev)
 static int bcm7xxx_28nm_d0_afe_config_init(struct phy_device *phydev)
 {
 	/* AFE_RXCONFIG_0 */
-	phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb15);
+	bcm_phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb15);
 
 	/* AFE_RXCONFIG_1 */
-	phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f);
+	bcm_phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f);
 
 	/* AFE_RXCONFIG_2, set rCal offset for HT=0 code and LT=-2 code */
-	phy_write_misc(phydev, AFE_RXCONFIG_2, 0x2003);
+	bcm_phy_write_misc(phydev, AFE_RXCONFIG_2, 0x2003);
 
 	/* AFE_RX_LP_COUNTER, set RX bandwidth to maximum */
-	phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0);
+	bcm_phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0);
 
 	/* AFE_TX_CONFIG, set 100BT Cfeed=011 to improve rise/fall time */
-	phy_write_misc(phydev, AFE_TX_CONFIG, 0x431);
+	bcm_phy_write_misc(phydev, AFE_TX_CONFIG, 0x431);
 
 	/* AFE_VDCA_ICTRL_0, set Iq=1101 instead of 0111 for AB symmetry */
-	phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da);
+	bcm_phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da);
 
 	/* AFE_VDAC_OTHERS_0, set 1000BT Cidac=010 for all ports */
-	phy_write_misc(phydev, AFE_VDAC_OTHERS_0, 0xa020);
+	bcm_phy_write_misc(phydev, AFE_VDAC_OTHERS_0, 0xa020);
 
 	/* AFE_HPF_TRIM_OTHERS, set 100Tx/10BT to -4.5% swing and set rCal
 	 * offset for HT=0 code
 	 */
-	phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3);
+	bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3);
 
 	/* CORE_BASE1E, force trim to overwrite and set I_ext trim to 0000 */
 	phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0x0010);
 
 	/* DSP_TAP10, adjust bias current trim (+0% swing, +0 tick) */
-	phy_write_misc(phydev, DSP_TAP10, 0x011b);
+	bcm_phy_write_misc(phydev, DSP_TAP10, 0x011b);
 
 	/* Reset R_CAL/RC_CAL engine */
 	r_rc_cal_reset(phydev);
@@ -165,24 +141,24 @@ static int bcm7xxx_28nm_d0_afe_config_init(struct phy_device *phydev)
 static int bcm7xxx_28nm_e0_plus_afe_config_init(struct phy_device *phydev)
 {
 	/* AFE_RXCONFIG_1, provide more margin for INL/DNL measurement */
-	phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f);
+	bcm_phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f);
 
 	/* AFE_TX_CONFIG, set 100BT Cfeed=011 to improve rise/fall time */
-	phy_write_misc(phydev, AFE_TX_CONFIG, 0x431);
+	bcm_phy_write_misc(phydev, AFE_TX_CONFIG, 0x431);
 
 	/* AFE_VDCA_ICTRL_0, set Iq=1101 instead of 0111 for AB symmetry */
-	phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da);
+	bcm_phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da);
 
 	/* AFE_HPF_TRIM_OTHERS, set 100Tx/10BT to -4.5% swing and set rCal
 	 * offset for HT=0 code
 	 */
-	phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3);
+	bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3);
 
 	/* CORE_BASE1E, force trim to overwrite and set I_ext trim to 0000 */
 	phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0x0010);
 
 	/* DSP_TAP10, adjust bias current trim (+0% swing, +0 tick) */
-	phy_write_misc(phydev, DSP_TAP10, 0x011b);
+	bcm_phy_write_misc(phydev, DSP_TAP10, 0x011b);
 
 	/* Reset R_CAL/RC_CAL engine */
 	r_rc_cal_reset(phydev);
@@ -190,53 +166,6 @@ static int bcm7xxx_28nm_e0_plus_afe_config_init(struct phy_device *phydev)
 	return 0;
 }
 
-static int bcm7xxx_apd_enable(struct phy_device *phydev)
-{
-	int val;
-
-	/* Enable powering down of the DLL during auto-power down */
-	val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_SCR3);
-	if (val < 0)
-		return val;
-
-	val |= BCM54XX_SHD_SCR3_DLLAPD_DIS;
-	bcm54xx_shadow_write(phydev, BCM54XX_SHD_SCR3, val);
-
-	/* Enable auto-power down */
-	val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_APD);
-	if (val < 0)
-		return val;
-
-	val |= BCM54XX_SHD_APD_EN;
-	return bcm54xx_shadow_write(phydev, BCM54XX_SHD_APD, val);
-}
-
-static int bcm7xxx_eee_enable(struct phy_device *phydev)
-{
-	int val;
-
-	val = phy_read_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL,
-				    MDIO_MMD_AN, phydev->addr);
-	if (val < 0)
-		return val;
-
-	/* Enable general EEE feature at the PHY level */
-	val |= LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X;
-
-	phy_write_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL,
-			       MDIO_MMD_AN, phydev->addr, val);
-
-	/* Advertise supported modes */
-	val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV,
-				    MDIO_MMD_AN, phydev->addr);
-
-	val |= (MDIO_AN_EEE_ADV_100TX | MDIO_AN_EEE_ADV_1000T);
-	phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV,
-			       MDIO_MMD_AN, phydev->addr, val);
-
-	return 0;
-}
-
 static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
 {
 	u8 rev = PHY_BRCM_7XXX_REV(phydev->dev_flags);
@@ -273,11 +202,11 @@ static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
 	if (ret)
 		return ret;
 
-	ret = bcm7xxx_eee_enable(phydev);
+	ret = bcm_phy_enable_eee(phydev);
 	if (ret)
 		return ret;
 
-	return bcm7xxx_apd_enable(phydev);
+	return bcm_phy_enable_apd(phydev, true);
 }
 
 static int bcm7xxx_28nm_resume(struct phy_device *phydev)
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 9c71295..07a6119 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -14,6 +14,7 @@
  *	2 of the License, or (at your option) any later version.
  */
 
+#include "bcm-phy-lib.h"
 #include <linux/module.h>
 #include <linux/phy.h>
 #include <linux/brcmphy.h>
@@ -29,39 +30,6 @@ MODULE_DESCRIPTION("Broadcom PHY driver");
 MODULE_AUTHOR("Maciej W. Rozycki");
 MODULE_LICENSE("GPL");
 
-/* Indirect register access functions for the Expansion Registers */
-static int bcm54xx_exp_read(struct phy_device *phydev, u16 regnum)
-{
-	int val;
-
-	val = phy_write(phydev, MII_BCM54XX_EXP_SEL, regnum);
-	if (val < 0)
-		return val;
-
-	val = phy_read(phydev, MII_BCM54XX_EXP_DATA);
-
-	/* Restore default value.  It's O.K. if this write fails. */
-	phy_write(phydev, MII_BCM54XX_EXP_SEL, 0);
-
-	return val;
-}
-
-static int bcm54xx_exp_write(struct phy_device *phydev, u16 regnum, u16 val)
-{
-	int ret;
-
-	ret = phy_write(phydev, MII_BCM54XX_EXP_SEL, regnum);
-	if (ret < 0)
-		return ret;
-
-	ret = phy_write(phydev, MII_BCM54XX_EXP_DATA, val);
-
-	/* Restore default value.  It's O.K. if this write fails. */
-	phy_write(phydev, MII_BCM54XX_EXP_SEL, 0);
-
-	return ret;
-}
-
 static int bcm54xx_auxctl_write(struct phy_device *phydev, u16 regnum, u16 val)
 {
 	return phy_write(phydev, MII_BCM54XX_AUX_CTL, regnum | val);
@@ -72,28 +40,28 @@ static int bcm50610_a0_workaround(struct phy_device *phydev)
 {
 	int err;
 
-	err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_AADJ1CH0,
+	err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_AADJ1CH0,
 				MII_BCM54XX_EXP_AADJ1CH0_SWP_ABCD_OEN |
 				MII_BCM54XX_EXP_AADJ1CH0_SWSEL_THPF);
 	if (err < 0)
 		return err;
 
-	err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_AADJ1CH3,
-					MII_BCM54XX_EXP_AADJ1CH3_ADCCKADJ);
+	err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_AADJ1CH3,
+				MII_BCM54XX_EXP_AADJ1CH3_ADCCKADJ);
 	if (err < 0)
 		return err;
 
-	err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP75,
+	err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_EXP75,
 				MII_BCM54XX_EXP_EXP75_VDACCTRL);
 	if (err < 0)
 		return err;
 
-	err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP96,
+	err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_EXP96,
 				MII_BCM54XX_EXP_EXP96_MYST);
 	if (err < 0)
 		return err;
 
-	err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP97,
+	err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_EXP97,
 				MII_BCM54XX_EXP_EXP97_MYST);
 
 	return err;
@@ -114,7 +82,7 @@ static int bcm54xx_phydsp_config(struct phy_device *phydev)
 	if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610 ||
 	    BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610M) {
 		/* Clear bit 9 to fix a phy interop issue. */
-		err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP08,
+		err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_EXP08,
 					MII_BCM54XX_EXP_EXP08_RJCT_2MHZ);
 		if (err < 0)
 			goto error;
@@ -129,12 +97,12 @@ static int bcm54xx_phydsp_config(struct phy_device *phydev)
 	if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM57780) {
 		int val;
 
-		val = bcm54xx_exp_read(phydev, MII_BCM54XX_EXP_EXP75);
+		val = bcm_phy_read_exp(phydev, MII_BCM54XX_EXP_EXP75);
 		if (val < 0)
 			goto error;
 
 		val |= MII_BCM54XX_EXP_EXP75_CM_OSC;
-		err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP75, val);
+		err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_EXP75, val);
 	}
 
 error:
@@ -159,7 +127,7 @@ static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev)
 	    BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610M)
 		return;
 
-	val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_SCR3);
+	val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_SCR3);
 	if (val < 0)
 		return;
 
@@ -190,9 +158,9 @@ static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev)
 		val |= BCM54XX_SHD_SCR3_TRDDAPD;
 
 	if (orig != val)
-		bcm54xx_shadow_write(phydev, BCM54XX_SHD_SCR3, val);
+		bcm_phy_write_shadow(phydev, BCM54XX_SHD_SCR3, val);
 
-	val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_APD);
+	val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_APD);
 	if (val < 0)
 		return;
 
@@ -204,7 +172,7 @@ static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev)
 		val &= ~BCM54XX_SHD_APD_EN;
 
 	if (orig != val)
-		bcm54xx_shadow_write(phydev, BCM54XX_SHD_APD, val);
+		bcm_phy_write_shadow(phydev, BCM54XX_SHD_APD, val);
 }
 
 static int bcm54xx_config_init(struct phy_device *phydev)
@@ -232,7 +200,7 @@ static int bcm54xx_config_init(struct phy_device *phydev)
 	if ((BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610 ||
 	     BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610M) &&
 	    (phydev->dev_flags & PHY_BRCM_CLEAR_RGMII_MODE))
-		bcm54xx_shadow_write(phydev, BCM54XX_SHD_RGMII_MODE, 0);
+		bcm_phy_write_shadow(phydev, BCM54XX_SHD_RGMII_MODE, 0);
 
 	if ((phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED) ||
 	    (phydev->dev_flags & PHY_BRCM_DIS_TXCRXC_NOENRGY) ||
@@ -254,8 +222,8 @@ static int bcm5482_config_init(struct phy_device *phydev)
 		/*
 		 * Enable secondary SerDes and its use as an LED source
 		 */
-		reg = bcm54xx_shadow_read(phydev, BCM5482_SHD_SSD);
-		bcm54xx_shadow_write(phydev, BCM5482_SHD_SSD,
+		reg = bcm_phy_read_shadow(phydev, BCM5482_SHD_SSD);
+		bcm_phy_write_shadow(phydev, BCM5482_SHD_SSD,
 				     reg |
 				     BCM5482_SHD_SSD_LEDM |
 				     BCM5482_SHD_SSD_EN);
@@ -264,10 +232,10 @@ static int bcm5482_config_init(struct phy_device *phydev)
 		 * Enable SGMII slave mode and auto-detection
 		 */
 		reg = BCM5482_SSD_SGMII_SLAVE | MII_BCM54XX_EXP_SEL_SSD;
-		err = bcm54xx_exp_read(phydev, reg);
+		err = bcm_phy_read_exp(phydev, reg);
 		if (err < 0)
 			return err;
-		err = bcm54xx_exp_write(phydev, reg, err |
+		err = bcm_phy_write_exp(phydev, reg, err |
 					BCM5482_SSD_SGMII_SLAVE_EN |
 					BCM5482_SSD_SGMII_SLAVE_AD);
 		if (err < 0)
@@ -277,10 +245,10 @@ static int bcm5482_config_init(struct phy_device *phydev)
 		 * Disable secondary SerDes powerdown
 		 */
 		reg = BCM5482_SSD_1000BX_CTL | MII_BCM54XX_EXP_SEL_SSD;
-		err = bcm54xx_exp_read(phydev, reg);
+		err = bcm_phy_read_exp(phydev, reg);
 		if (err < 0)
 			return err;
-		err = bcm54xx_exp_write(phydev, reg,
+		err = bcm_phy_write_exp(phydev, reg,
 					err & ~BCM5482_SSD_1000BX_CTL_PWRDOWN);
 		if (err < 0)
 			return err;
@@ -288,15 +256,15 @@ static int bcm5482_config_init(struct phy_device *phydev)
 		/*
 		 * Select 1000BASE-X register set (primary SerDes)
 		 */
-		reg = bcm54xx_shadow_read(phydev, BCM5482_SHD_MODE);
-		bcm54xx_shadow_write(phydev, BCM5482_SHD_MODE,
+		reg = bcm_phy_read_shadow(phydev, BCM5482_SHD_MODE);
+		bcm_phy_write_shadow(phydev, BCM5482_SHD_MODE,
 				     reg | BCM5482_SHD_MODE_1000BX);
 
 		/*
 		 * LED1=ACTIVITYLED, LED3=LINKSPD[2]
 		 * (Use LED1 as secondary SerDes ACTIVITY LED)
 		 */
-		bcm54xx_shadow_write(phydev, BCM5482_SHD_LEDS1,
+		bcm_phy_write_shadow(phydev, BCM5482_SHD_LEDS1,
 			BCM5482_SHD_LEDS1_LED1(BCM_LED_SRC_ACTIVITYLED) |
 			BCM5482_SHD_LEDS1_LED3(BCM_LED_SRC_LINKSPD2));
 
@@ -334,35 +302,6 @@ static int bcm5482_read_status(struct phy_device *phydev)
 	return err;
 }
 
-static int bcm54xx_ack_interrupt(struct phy_device *phydev)
-{
-	int reg;
-
-	/* Clear pending interrupts.  */
-	reg = phy_read(phydev, MII_BCM54XX_ISR);
-	if (reg < 0)
-		return reg;
-
-	return 0;
-}
-
-static int bcm54xx_config_intr(struct phy_device *phydev)
-{
-	int reg, err;
-
-	reg = phy_read(phydev, MII_BCM54XX_ECR);
-	if (reg < 0)
-		return reg;
-
-	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
-		reg &= ~MII_BCM54XX_ECR_IM;
-	else
-		reg |= MII_BCM54XX_ECR_IM;
-
-	err = phy_write(phydev, MII_BCM54XX_ECR, reg);
-	return err;
-}
-
 static int bcm5481_config_aneg(struct phy_device *phydev)
 {
 	int ret;
@@ -519,8 +458,8 @@ static struct phy_driver broadcom_drivers[] = {
 	.config_init	= bcm54xx_config_init,
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
-	.ack_interrupt	= bcm54xx_ack_interrupt,
-	.config_intr	= bcm54xx_config_intr,
+	.ack_interrupt	= bcm_phy_ack_intr,
+	.config_intr	= bcm_phy_config_intr,
 	.driver		= { .owner = THIS_MODULE },
 }, {
 	.phy_id		= PHY_ID_BCM5421,
@@ -532,8 +471,8 @@ static struct phy_driver broadcom_drivers[] = {
 	.config_init	= bcm54xx_config_init,
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
-	.ack_interrupt	= bcm54xx_ack_interrupt,
-	.config_intr	= bcm54xx_config_intr,
+	.ack_interrupt	= bcm_phy_ack_intr,
+	.config_intr	= bcm_phy_config_intr,
 	.driver		= { .owner = THIS_MODULE },
 }, {
 	.phy_id		= PHY_ID_BCM5461,
@@ -545,8 +484,8 @@ static struct phy_driver broadcom_drivers[] = {
 	.config_init	= bcm54xx_config_init,
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
-	.ack_interrupt	= bcm54xx_ack_interrupt,
-	.config_intr	= bcm54xx_config_intr,
+	.ack_interrupt	= bcm_phy_ack_intr,
+	.config_intr	= bcm_phy_config_intr,
 	.driver		= { .owner = THIS_MODULE },
 }, {
 	.phy_id		= PHY_ID_BCM54616S,
@@ -558,8 +497,8 @@ static struct phy_driver broadcom_drivers[] = {
 	.config_init	= bcm54xx_config_init,
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
-	.ack_interrupt	= bcm54xx_ack_interrupt,
-	.config_intr	= bcm54xx_config_intr,
+	.ack_interrupt	= bcm_phy_ack_intr,
+	.config_intr	= bcm_phy_config_intr,
 	.driver		= { .owner = THIS_MODULE },
 }, {
 	.phy_id		= PHY_ID_BCM5464,
@@ -571,8 +510,8 @@ static struct phy_driver broadcom_drivers[] = {
 	.config_init	= bcm54xx_config_init,
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
-	.ack_interrupt	= bcm54xx_ack_interrupt,
-	.config_intr	= bcm54xx_config_intr,
+	.ack_interrupt	= bcm_phy_ack_intr,
+	.config_intr	= bcm_phy_config_intr,
 	.driver		= { .owner = THIS_MODULE },
 }, {
 	.phy_id		= PHY_ID_BCM5481,
@@ -584,8 +523,8 @@ static struct phy_driver broadcom_drivers[] = {
 	.config_init	= bcm54xx_config_init,
 	.config_aneg	= bcm5481_config_aneg,
 	.read_status	= genphy_read_status,
-	.ack_interrupt	= bcm54xx_ack_interrupt,
-	.config_intr	= bcm54xx_config_intr,
+	.ack_interrupt	= bcm_phy_ack_intr,
+	.config_intr	= bcm_phy_config_intr,
 	.driver		= { .owner = THIS_MODULE },
 }, {
 	.phy_id		= PHY_ID_BCM5482,
@@ -597,8 +536,8 @@ static struct phy_driver broadcom_drivers[] = {
 	.config_init	= bcm5482_config_init,
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= bcm5482_read_status,
-	.ack_interrupt	= bcm54xx_ack_interrupt,
-	.config_intr	= bcm54xx_config_intr,
+	.ack_interrupt	= bcm_phy_ack_intr,
+	.config_intr	= bcm_phy_config_intr,
 	.driver		= { .owner = THIS_MODULE },
 }, {
 	.phy_id		= PHY_ID_BCM50610,
@@ -610,8 +549,8 @@ static struct phy_driver broadcom_drivers[] = {
 	.config_init	= bcm54xx_config_init,
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
-	.ack_interrupt	= bcm54xx_ack_interrupt,
-	.config_intr	= bcm54xx_config_intr,
+	.ack_interrupt	= bcm_phy_ack_intr,
+	.config_intr	= bcm_phy_config_intr,
 	.driver		= { .owner = THIS_MODULE },
 }, {
 	.phy_id		= PHY_ID_BCM50610M,
@@ -623,8 +562,8 @@ static struct phy_driver broadcom_drivers[] = {
 	.config_init	= bcm54xx_config_init,
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
-	.ack_interrupt	= bcm54xx_ack_interrupt,
-	.config_intr	= bcm54xx_config_intr,
+	.ack_interrupt	= bcm_phy_ack_intr,
+	.config_intr	= bcm_phy_config_intr,
 	.driver		= { .owner = THIS_MODULE },
 }, {
 	.phy_id		= PHY_ID_BCM57780,
@@ -636,8 +575,8 @@ static struct phy_driver broadcom_drivers[] = {
 	.config_init	= bcm54xx_config_init,
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
-	.ack_interrupt	= bcm54xx_ack_interrupt,
-	.config_intr	= bcm54xx_config_intr,
+	.ack_interrupt	= bcm_phy_ack_intr,
+	.config_intr	= bcm_phy_config_intr,
 	.driver		= { .owner = THIS_MODULE },
 }, {
 	.phy_id		= PHY_ID_BCMAC131,
diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
index 697ca77..6a53ab9 100644
--- a/include/linux/brcmphy.h
+++ b/include/linux/brcmphy.h
@@ -138,7 +138,10 @@
 
 /* 01010: Auto Power-Down */
 #define BCM54XX_SHD_APD			0x0a
+#define  BCM_APD_CLR_MASK		0xFE9F /* clear bits 5, 6 & 8 */
 #define  BCM54XX_SHD_APD_EN		0x0020
+#define  BCM_NO_ANEG_APD_EN		0x0060 /* bits 5 & 6 */
+#define  BCM_APD_SINGLELP_EN	0x0100 /* Bit 8 */
 
 #define BCM5482_SHD_LEDS1	0x0d	/* 01101: LED Selector 1 */
 					/* LED3 / ~LINKSPD[2] selector */
@@ -209,25 +212,6 @@
 #define MII_BRCM_FET_SHDW_AUXSTAT2	0x1b	/* Auxiliary status 2 */
 #define MII_BRCM_FET_SHDW_AS2_APDE	0x0020	/* Auto power down enable */
 
-/*
- * Indirect register access functions for the 1000BASE-T/100BASE-TX/10BASE-T
- * 0x1c shadow registers.
- */
-static inline int bcm54xx_shadow_read(struct phy_device *phydev, u16 shadow)
-{
-	phy_write(phydev, MII_BCM54XX_SHD, MII_BCM54XX_SHD_VAL(shadow));
-	return MII_BCM54XX_SHD_DATA(phy_read(phydev, MII_BCM54XX_SHD));
-}
-
-static inline int bcm54xx_shadow_write(struct phy_device *phydev, u16 shadow,
-				       u16 val)
-{
-	return phy_write(phydev, MII_BCM54XX_SHD,
-			 MII_BCM54XX_SHD_WRITE |
-			 MII_BCM54XX_SHD_VAL(shadow) |
-			 MII_BCM54XX_SHD_DATA(val));
-}
-
 #define BRCM_CL45VEN_EEE_CONTROL	0x803d
 #define LPI_FEATURE_EN			0x8000
 #define LPI_FEATURE_EN_DIG1000X		0x4000
-- 
2.5.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux