Add imx7d-sdb iomuxc-lpsr hoggrp-2 default pads settings
Add iomuxc-lpsr usb_otg1_vbus pinctrl settings
Signed-off-by: Adrian Alonso <aalonso@xxxxxxxxxxxxx>
---
Changes for V2: Resend
Changes for V3: Resend
Changes for V4: Resend
Changes for V5: Resend
Changes for V6:
- Add wdog pinctrl group, add comments for hog2 group gpios
Changes for V7:
- Remove wdog pinctrl settings as they are not currently used
- Add pinctrl_usb_otg1_vbus settings
Changes for V8: Resend
arch/arm/boot/dts/imx7d-sdb.dts | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 88308f3..ca68a67 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -65,6 +65,8 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg1_vbus>;
enable-active-high;
};
@@ -495,3 +497,22 @@
};
};
+
+&iomuxc_lpsr {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog_2>;
+
+ imx7d-sdb {
+ pinctrl_hog_2: hog2grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x59 /* sensor_int_b */
+ >;
+ };
+
+ pinctrl_usb_otg1_vbus: usbotg1vbusgrp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x14 /* usb_otg1_pwr */
+ >;
+ };
+ };
+};
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
