The patch is to add support to make the output voltage of ACT8865
DC/DC regulator determined by VSET2[] bits. The DT property
"active-semi,vsel-high" is used to specify the VSEL pin at high
on the board. When the VSEL pin is high, output voltage is programmed
by VSET2[] bits.
Wenyou Yang (2):
regulator: act8865: support output voltage by VSET2[] bits
regulator: act8865: add DT binding for property
"active-semi,vsel-high"
.../bindings/regulator/act8865-regulator.txt | 3 +++
drivers/regulator/act8865-regulator.c | 24 ++++++++++++++++++--
2 files changed, 25 insertions(+), 2 deletions(-)
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
