This patch adds a compatible string to support for R-Car H3.
Since the HS-USB controller of R-Car H3 is almost the same specification
with R-Car Gen2 (these have 16 pipes and usb-dmac), this patch
sets the "type" of renesas_usbhs_driver_param to USBHS_TYPE_RCAR_GEN2.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
---
Documentation/devicetree/bindings/usb/renesas_usbhs.txt | 1 +
drivers/usb/renesas_usbhs/common.c | 5 +++++
2 files changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
index 64a4ca6..7d48f63 100644
--- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
+++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
@@ -5,6 +5,7 @@ Required properties:
- "renesas,usbhs-r8a7790"
- "renesas,usbhs-r8a7791"
- "renesas,usbhs-r8a7794"
+ - "renesas,usbhs-r8a7795"
- reg: Base address and length of the register for the USBHS
- interrupts: Interrupt specifier for the USBHS
- clocks: A list of phandle + clock specifier pairs
diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c
index 0ce398c..d82fa36 100644
--- a/drivers/usb/renesas_usbhs/common.c
+++ b/drivers/usb/renesas_usbhs/common.c
@@ -476,6 +476,11 @@ static const struct of_device_id usbhs_of_match[] = {
.compatible = "renesas,usbhs-r8a7794",
.data = (void *)USBHS_TYPE_RCAR_GEN2,
},
+ {
+ /* Gen3 is compatible with Gen2 */
+ .compatible = "renesas,usbhs-r8a7795",
+ .data = (void *)USBHS_TYPE_RCAR_GEN2,
+ },
{ },
};
MODULE_DEVICE_TABLE(of, usbhs_of_match);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
