W dniu 29.09.2015 o 07:33, Andreas Dannenberg pisze: > A software-based approach for determining the charger's input voltage > "Power Good" state is introduced for devices like the bq24250 which > don't have a dedicated hardware pin for that purpose. This SW-based > approach is also used for other devices (with dedicated PG pin) as a > fall back solution if that pin is not configured to be used through > "pg-gpios". > > Signed-off-by: Andreas Dannenberg <dannenberg@xxxxxx> > --- > drivers/power/bq24257_charger.c | 56 +++++++++++++++++++++++++++++++++-------- > 1 file changed, 45 insertions(+), 11 deletions(-) > Reviewed-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx> Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
