On 25 September 2015 at 08:52, Maxime Ripard
<maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote:
> On Wed, Sep 23, 2015 at 08:47:50PM +0200, codekipper@xxxxxxxxx wrote:
>> From: Marcus Cooper <codekipper@xxxxxxxxx>
>>
>> The A20-SOM-EVB is a reference design of a 2-layer board for the
>> A20-SOM.
>> It expands the features of A20-SOM by adding VGA connector, HDMI
>> connector, audio In/Out, LCD connector, 2 Mpix camera, gigabit
>> Ethernet, SATA, USB-OTG and 2 USB hosts.
>>
>> Signed-off-by: Marcus Cooper <codekipper@xxxxxxxxx>
>> ---
>> Changes since v2:
>> - changed dcdc2 to have max voltage of 1.4V
>> Changes since v1:
>> - renamed dts from sun7i-a20-olinuxino-evb to sun7i-a20-olimex-som-evb
>> - added "axp209 dtsi"
>> - change regulator settings
>> ---
>> arch/arm/boot/dts/Makefile | 1 +
>> arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts | 216 +++++++++++++++++++++++++
>> 2 files changed, 217 insertions(+)
>> create mode 100644 arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index 359dcb5..8419a3e 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -617,6 +617,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
>> sun7i-a20-i12-tvbox.dtb \
>> sun7i-a20-m3.dtb \
>> sun7i-a20-mk808c.dtb \
>> + sun7i-a20-olimex-som-evb.dtb \
>> sun7i-a20-olinuxino-lime.dtb \
>> sun7i-a20-olinuxino-lime2.dtb \
>> sun7i-a20-olinuxino-micro.dtb \
>> diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
>> new file mode 100644
>> index 0000000..41b4b4a
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
>> @@ -0,0 +1,216 @@
>> +/*
>> + * Copyright 2015 - Marcus Cooper <codekipper@xxxxxxxxx>
>> + *
>> + * This file is dual-licensed: you can use it either under the terms
>> + * of the GPL or the X11 license, at your option. Note that this dual
>> + * licensing only applies to this file, and not this project as a
>> + * whole.
>> + *
>> + * a) This file is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation; either version 2 of the
>> + * License, or (at your option) any later version.
>> + *
>> + * This file is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * Or, alternatively,
>> + *
>> + * b) Permission is hereby granted, free of charge, to any person
>> + * obtaining a copy of this software and associated documentation
>> + * files (the "Software"), to deal in the Software without
>> + * restriction, including without limitation the rights to use,
>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>> + * sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following
>> + * conditions:
>> + *
>> + * The above copyright notice and this permission notice shall be
>> + * included in all copies or substantial portions of the Software.
>> + *
>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>> + */
>> +
>> +/dts-v1/;
>> +#include "sun7i-a20.dtsi"
>> +#include "sunxi-common-regulators.dtsi"
>> +
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +#include <dt-bindings/pinctrl/sun4i-a10.h>
>> +
>> +/ {
>> + model = "Olimex A20-Olimex-SOM-EVB";
>> + compatible = "olimex,a20-olimex-som-evb", "allwinner,sun7i-a20";
>> +
>> + aliases {
>> + serial0 = &uart0;
>> + };
>> +
>> + chosen {
>> + stdout-path = "serial0:115200n8";
>> + };
>> +
>> + leds {
>> + compatible = "gpio-leds";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&led_pins_olimex_som_evb>;
>> +
>> + green {
>> + label = "a20-olimex-som-evb:green:usr";
>> + gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
>> + default-state = "on";
>> + };
>> + };
>> +
>> + reg_axp_ipsout: axp_ipsout {
>> + compatible = "regulator-fixed";
>> + regulator-name = "axp-ipsout";
>> + regulator-min-microvolt = <5000000>;
>> + regulator-max-microvolt = <5000000>;
>> + regulator-always-on;
>> + };
>
> Are you using that regulator somewhere?
>
>> +};
>> +
>> +&ahci {
>> + target-supply = <®_ahci_5v>;
>> + status = "okay";
>> +};
>> +
>> +&ehci0 {
>> + status = "okay";
>> +};
>> +
>> +&ehci1 {
>> + status = "okay";
>> +};
>> +
>> +&gmac {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&gmac_pins_rgmii_a>;
>> + phy = <&phy1>;
>> + phy-mode = "rgmii";
>> + status = "okay";
>> +
>> + phy1: ethernet-phy@1 {
>> + reg = <1>;
>> + };
>> +};
>> +
>> +&i2c0 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&i2c0_pins_a>;
>> + status = "okay";
>> +
>> + axp209: pmic@34 {
>> + reg = <0x34>;
>> + interrupt-parent = <&nmi_intc>;
>> + interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
>> + };
>> +};
>> +
>> +&i2c1 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&i2c1_pins_a>;
>> + status = "okay";
>> +};
>
> Having aliases for these two would be great to make sure that the bus
> number is fixed.
Maybe I should remove this from the dts for now. I do use it for
controlling my i2s device but those changes would never be upstreamed.
What do you think?
CK
>
>> +&mmc0 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
>> + vmmc-supply = <®_vcc3v3>;
>> + bus-width = <4>;
>> + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
>> + cd-inverted;
>> + status = "okay";
>> +};
>> +
>> +&ohci0 {
>> + status = "okay";
>> +};
>> +
>> +&ohci1 {
>> + status = "okay";
>> +};
>> +
>> +&pio {
>> + ahci_pwr_pin_olimex_som_evb: ahci_pwr_pin@1 {
>> + allwinner,pins = "PC3";
>> + allwinner,function = "gpio_out";
>> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
>> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> + };
>> +
>> + led_pins_olimex_som_evb: led_pins@0 {
>> + allwinner,pins = "PH2";
>> + allwinner,function = "gpio_out";
>> + allwinner,drive = <SUN4I_PINCTRL_20_MA>;
>> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
>> + };
>> +};
>> +
>> +®_ahci_5v {
>> + pinctrl-0 = <&ahci_pwr_pin_olimex_som_evb>;
>> + gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
>> + status = "okay";
>> +};
>> +
>> +#include "axp209.dtsi"
>> +
>> +®_dcdc2 {
>> + regulator-always-on;
>> + regulator-min-microvolt = <1000000>;
>> + regulator-max-microvolt = <1400000>;
>> + regulator-name = "vdd-cpu";
>> +};
>> +
>> +®_dcdc3 {
>> + regulator-always-on;
>> + regulator-min-microvolt = <1000000>;
>> + regulator-max-microvolt = <1400000>;
>> + regulator-name = "vdd-int-dll";
>> +};
>> +
>> +®_ldo1 {
>> + regulator-name = "vdd-rtc";
>> +};
>> +
>> +®_ldo2 {
>> + regulator-always-on;
>> + regulator-min-microvolt = <3000000>;
>> + regulator-max-microvolt = <3000000>;
>> + regulator-name = "avcc";
>> +};
>> +
>> +®_usb0_vbus {
>> + status = "okay";
>> +};
>> +
>> +®_usb1_vbus {
>> + status = "okay";
>> +};
>> +
>> +®_usb2_vbus {
>> + status = "okay";
>> +};
>> +
>> +&uart0 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&uart0_pins_a>;
>> + status = "okay";
>> +};
>> +
>> +&usbphy {
>> + usb1_vbus-supply = <®_usb1_vbus>;
>> + usb2_vbus-supply = <®_usb2_vbus>;
>> + status = "okay";
>> +};
>> --
>> 2.4.6
>>
>
> Thanks!
> Maxime
>
> --
> Maxime Ripard, Free Electrons
> Embedded Linux, Kernel and Android engineering
> http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
