Re: [PATCH 1/3] Revert "ARM: dts: sun8i: Add new sun8i-a33-q8-tzx-723q4.dts file"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Thu, Sep 24, 2015 at 05:23:52PM +0200, Hans de Goede wrote:
> The tzx-723q[a]4 board variant of A33 based Q8 formfactor tablets was
> given its own dts file because the mmc would not work with a drive
> strength of 30mA, Android seemed to be using a lower drive-strength
> and doing the same with the upstream kernel seemed to fix this issue.
> 
> While working on a similar fix for u-boot I noticed that Android did
> not use a lower drive strength for mmc0, but for mmc1, so mmc0 should
> work fine with a drive strength of 30mA.
> 
> Further investigation has shown that Allwinner is using slightly
> tweaked clock sample phase settings in newer Android kernels, and
> that updating the mainstream sunxi mmc driver to these settings fixes
> this.
> 
> With this fixed we no longer need a dts file specifically for these
> pcb varants -> drop this dts file.

I dropped the patch.

> This reverts commit fb61c559a810f1487892b83d2d0606af1d020318.

Checkpatch prints an error about this one. Make sure you have the
right commit format.

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux