Nishanth,
On 09/24/2015 10:20 AM, Nishanth Menon wrote:
On 09/24/2015 09:05 AM, Murali Karicheri wrote:
On 09/23/2015 02:19 PM, santosh shilimkar wrote:
Nishant,
On 9/22/2015 9:08 AM, Nishanth Menon wrote:
Keystone2 devices are used on more platforms than just Texas
Instruments reference evaluation platforms called EVMs. Providing a
generic compatible "ti,keystone" is not sufficient to differentiate
various SoC definitions possible on various platforms. So, provide
compatible matches for each SoC family by itself.
This allows SoC specific logic to be run time handled based on
of_machine_is_compatible("ti,k2hk") or as needed for the dependent
processor instead of needing to use board dependent compatibles that
are needed now.
Signed-off-by: Nishanth Menon <nm@xxxxxx>
---
You need to expand that 'not sufficient' for me. Unless there is
genuine case to support this, I would want to avoid this churn.
I agree. If there are run time check required in code to treat the
variants of Keystone SoC differently, then this change is needed. At
this time, SoC DTS captures these differences. IMHO, If a future
Keystone SoC support required SoC specific compatibility string to
customize SoC specific initialization code, then it can be introduced at
that time. I am not sure why this is introduced with out an example usage.
a) See
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/usage-model.txt#n116
-> all we have today is board, soc generic family. The generic
compatible flag of ti,keystone to mark that this is a keystone2 device
does not identify that what kind of soc it is. which is what this
series introduces.
b) there is no realistic way for user space applications such as a
test framework or other SoC based applications in a generic distro to
detect the right SoC this platform is running on - imagine writing SoC
specific code that depends on board compatible flags - there is never
an end to that story as the number of boards expand.
c) Ideally we will try never to introduce code that will have to
depend on SoC compatible flag based match in kernel - but that is not
a reason not to follow guidelines provided by devicetree documentation
to provide SoC specific compatible flags.
Thanks for pointing out the link which provided me some thing to cross
check my argument.
The relevant description from the above quoted below for discussion.
===================== Cut from the above ===============================
The 'compatible' property contains a sorted list of strings starting
with the exact name of the machine, followed by an optional list of
boards it is compatible with sorted from most compatible to least. For
example, the root compatible properties for the TI BeagleBoard and its
successor, the BeagleBoard xM board might look like, respectively:
compatible = "ti,omap3-beagleboard", "ti,omap3450", "ti,omap3";
compatible = "ti,omap3-beagleboard-xm", "ti,omap3450", "ti,omap3";
Where "ti,omap3-beagleboard-xm" specifies the exact model, it also
claims that it compatible with the OMAP 3450 SoC, and the omap3 family
of SoCs in general. You'll notice that the list is sorted from most
specific (exact board) to least specific (SoC family).
=======================================================================
So in keystone case, we have
"ti,k2hk-evm","ti,keystone";
IMO, this is consistent with the above description as ti,k2hk-evm
describes the board exactly and ti,keystone is the optional list which
is a generic SoC name.
=========================== Cut from the above==========================
The reasoning behind this scheme is the observation that in the majority
of cases, a single machine_desc can support a large number of boards
if they all use the same SoC, or same family of SoCs. However,
invariably there will be some exceptions where a specific board will
require special setup code that is not useful in the generic case.
Special cases could be handled by explicitly checking for the
troublesome board(s) in generic setup code, but doing so very quickly
becomes ugly and/or unmaintainable if it is more than just a couple of
cases.
Instead, the compatible list allows a generic machine_desc to provide
support for a wide common set of boards by specifying "less
compatible" values in the dt_compat list. In the example above,
generic board support can claim compatibility with "ti,omap3" or
"ti,omap3450". If a bug was discovered on the original beagleboard
that required special workaround code during early boot, then a new
machine_desc could be added which implements the workarounds and only
matches on "ti,omap3-beagleboard".
=======================================================================
This is how interpret the above.
ti,omap3 is the family of omap3 devices similar to keystone. ti,omap3450
is required if there is an exceptional treatment required for ti,omap3450.
In keystone case so far there is no case of exceptional treatment
required in the code for a specific SoC. So a generic name, ti,keystone
is used. When exceptional treatment is needed in the future, for example
k2hk Soc, we should introduce SoC specific string in the following order.
"ti,k2hk-evm", "ti,k2hk", "ti,keystone"
So unless there is an exception, there is no need for a SoC specific
string in the compatibility string list. So this can be added later if
there is need for exceptional treatment. Did I get it wrong?
--
Murali Karicheri
Linux Kernel, Keystone
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html