Hi Felipe, Any comments on the below [v4] patches? [PATCH 1/3][v4] Documentation: dt: dwc3: Add snps,quirk-frame-length-adjustment property [PATCH 2/3][v4] drivers: usb: dwc3: Add frame length adjustment quirk [PATCH 3/3][v4] arm: dts: ls1021a: Add quirk for Erratum A009116 I will be taking forward these patches, as Nikhil has left freescale. Thanks, Rajesh Bhagat -----Original Message----- From: Nikhil Badola [mailto:nikhil.badola@xxxxxxxxxxxxx] Sent: Friday, September 04, 2015 10:15 AM To: linux-kernel@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-usb@xxxxxxxxxxxxxxx Cc: balbi@xxxxxx; Badola Nikhil-B46172 <nikhil.badola@xxxxxxxxxxxxx> Subject: [PATCH 1/3][v4] Documentation: dt: dwc3: Add snps,quirk-frame-length-adjustment property Add snps,quirk-frame-length-adjustment property which provides value for post silicon frame length adjustment Signed-off-by: Nikhil Badola <nikhil.badola@xxxxxxxxxxxxx> --- Changes for v4: None Documentation/devicetree/bindings/usb/dwc3.txt | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index 0815eac..8c7d585 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -40,6 +40,9 @@ Optional properties: - snps,hird-threshold: HIRD threshold - snps,hsphy_interface: High-Speed PHY interface selection between "utmi" for UTMI+ and "ulpi" for ULPI when the DWC_USB3_HSPHY_INTERFACE has value 3. + - snps,quirk-frame-length-adjustment: Value for GFLADJ_30MHZ field of GFLADJ + register for post-silicon frame length adjustment when the + fladj_30mhz_sdbnd signal is invalid or incorrect. This is usually a subnode to DWC3 glue to which it is connected. -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html