From: David Daney <david.daney@xxxxxxxxxx>
If the bus is being configured with a bus-range that does not start at
zero, pass that starting bus number to pci_scan_root_bus(). Passing
the incorrect value of zero causes attempted config accesses outside
of the supported range, which cascades to an OOPs spew and eventual
kernel panic.
Acked-by: Will Deacon <will.deacon@xxxxxxx>
Signed-off-by: David Daney <david.daney@xxxxxxxxxx>
---
No change from v1 or v2.
drivers/pci/host/pci-host-generic.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pci/host/pci-host-generic.c b/drivers/pci/host/pci-host-generic.c
index 0a9c453..e364232 100644
--- a/drivers/pci/host/pci-host-generic.c
+++ b/drivers/pci/host/pci-host-generic.c
@@ -259,7 +259,7 @@ static int gen_pci_probe(struct platform_device *pdev)
if (!pci_has_flag(PCI_PROBE_ONLY))
pci_add_flags(PCI_REASSIGN_ALL_RSRC | PCI_REASSIGN_ALL_BUS);
- bus = pci_scan_root_bus(dev, 0,
+ bus = pci_scan_root_bus(dev, pci->cfg.bus_range->start,
&pci->cfg.ops.ops, pci, &pci->resources);
if (!bus) {
dev_err(dev, "Scanning rootbus failed");
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
