On 21/09/15 16:02, Rob Herring wrote:
> On 09/16/2015 03:14 AM, Adriana Reus wrote:
>> Added entries in i2c/vendor-prefixes for the us5182d als and proximity sensor.
>> Also added a documentation file for this sensor's properties.
>>
>> Signed-off-by: Adriana Reus <adriana.reus@xxxxxxxxx>
>> ---
>> Changes since v6:
>> * Added some aditional clarifications on the optional
>> properties, as suggested by Rob.
>
> Acked-by: Rob Herring <robh@xxxxxxxxxx>
Thanks. Applied to the togreg branch of iio.git - initially pushed out
as testing for the autobuilders to play with it.
Jonathan
>
>>
>> .../devicetree/bindings/iio/light/us5182d.txt | 34 ++++++++++++++++++++++
>> .../devicetree/bindings/vendor-prefixes.txt | 1 +
>> 2 files changed, 35 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/iio/light/us5182d.txt
>>
>> diff --git a/Documentation/devicetree/bindings/iio/light/us5182d.txt b/Documentation/devicetree/bindings/iio/light/us5182d.txt
>> new file mode 100644
>> index 0000000..6f0a530
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iio/light/us5182d.txt
>> @@ -0,0 +1,34 @@
>> +* UPISEMI us5182d I2C ALS and Proximity sensor
>> +
>> +Required properties:
>> +- compatible: must be "upisemi,usd5182"
>> +- reg: the I2C address of the device
>> +
>> +Optional properties:
>> +- upisemi,glass-coef: glass attenuation factor - compensation factor of
>> + resolution 1000 for material transmittance.
>> +- upisemi,dark-ths: array of 8 elements containing 16-bit thresholds (adc
>> + counts) corresponding to every scale.
>> +- upisemi,upper-dark-gain: 8-bit dark gain compensation factor(4 int and 4
>> + fractional bits - Q4.4) applied when light > threshold
>> +- upisemi,lower-dark-gain: 8-bit dark gain compensation factor(4 int and 4
>> + fractional bits - Q4.4) applied when light < threshold
>> +
>> +If the optional properties are not specified these factors will default to the
>> +values in the below example.
>> +The glass-coef defaults to no compensation for the covering material.
>> +The threshold array defaults to experimental values that work with US5182D
>> +sensor on evaluation board - roughly between 12-32 lux.
>> +There will be no dark-gain compensation by default when ALS > thresh
>> +(0 * dark-gain), and a 1.35 compensation factor when ALS < thresh.
>> +
>> +Example:
>> +
>> + usd5182@39 {
>> + compatible = "upisemi,usd5182";
>> + reg = <0x39>;
>> + upisemi,glass-coef = < 1000 >;
>> + upisemi,dark-ths = /bits/ 16 <170 200 512 512 800 2000 4000 8000>;
>> + upisemi,upper-dark-gain = /bits/ 8 <0x00>;
>> + upisemi,lower-dark-gain = /bits/ 8 <0x16>;
>> + };
>> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
>> index 341695b..85ba915 100644
>> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
>> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
>> @@ -213,6 +213,7 @@ toshiba Toshiba Corporation
>> toumaz Toumaz
>> tplink TP-LINK Technologies Co., Ltd.
>> truly Truly Semiconductors Limited
>> +upisemi uPI Semiconductor Corp.
>> usi Universal Scientific Industrial Co., Ltd.
>> v3 V3 Semiconductor
>> variscite Variscite Ltd.
>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
