On 09/17/2015 04:45 AM, Alim Akhtar wrote: > From: Seungwon Jeon <essuuj@xxxxxxxxx> > > This patch introduces Exynos UFS PHY driver. This driver > supports to deal with phy calibration and power control > according to UFS host driver's behavior. > > Signed-off-by: Seungwon Jeon <essuuj@xxxxxxxxx> > Signed-off-by: Alim Akhtar <alim.akhtar@xxxxxxxxxxx> > Cc: Kishon Vijay Abraham I <kishon@xxxxxx> > --- > .../devicetree/bindings/phy/samsung-phy.txt | 22 ++ It is preferred to put the binding in a separate patch. > drivers/phy/Kconfig | 7 + > drivers/phy/Makefile | 1 + > drivers/phy/phy-exynos-ufs.c | 262 ++++++++++++++++++++ > drivers/phy/phy-exynos-ufs.h | 85 +++++++ > drivers/phy/phy-exynos7-ufs.h | 89 +++++++ > include/linux/phy/phy-exynos-ufs.h | 107 ++++++++ > 7 files changed, 573 insertions(+) > create mode 100644 drivers/phy/phy-exynos-ufs.c > create mode 100644 drivers/phy/phy-exynos-ufs.h > create mode 100644 drivers/phy/phy-exynos7-ufs.h > create mode 100644 include/linux/phy/phy-exynos-ufs.h > > diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt > index 60c6f2a..1abe2c4 100644 > --- a/Documentation/devicetree/bindings/phy/samsung-phy.txt > +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt > @@ -174,3 +174,25 @@ Example: > usbdrdphy0 = &usb3_phy0; > usbdrdphy1 = &usb3_phy1; > }; > + > +Samsung Exynos7 soc serise UFS PHY Controller s/serise/series/ > +--------------------------------------------- > + > +UFS PHY nodes are defined to describe on-chip UFS Physical layer controllers. > +Each UFS PHY controller should have its own node. > + > +Required properties: > +- compatible : compatible list, contains "samsung,exynos7-ufs-phy" > +- reg : offset and length of the UFS PHY register set; > +- reg-names : reg name(s) must be 'phy-pma'; > +- #phy-cells : must be zero > +- samsung,syscon-phandle : a phandle to the PMU system controller, no arguments How about samsung,pmu-syscon as syscon can mean a variety of things? > + > +Example: > + ufs_phy: ufs-phy@0x15571800 { > + compatible = "samsung,exynos7-ufs-phy"; > + reg = <0x15571800 0x240>; > + reg-names = "phy-pma"; > + samsung,syscon-phandle = <&pmu_system_controller>; > + #phy-cells = <0>; > + }; > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig > index 6b8dd16..7449376 100644 > --- a/drivers/phy/Kconfig > +++ b/drivers/phy/Kconfig > @@ -358,4 +358,11 @@ config PHY_BRCMSTB_SATA > Enable this to support the SATA3 PHY on 28nm Broadcom STB SoCs. > Likely useful only with CONFIG_SATA_BRCMSTB enabled. > > +config PHY_EXYNOS_UFS > + tristate "EXYNOS SoC series UFS PHY driver" > + depends on OF && ARCH_EXYNOS || COMPILE_TEST > + select GENERIC_PHY > + help > + Support for UFS PHY on Samsung EXYNOS chipsets. > + > endmenu -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html