This series adds support for Marvell berlin4ct pin-controller, allowing to configure the pin muxing from the device tree. Since v1: - use generic name for pin functions - a new commit to add pinmux for uart0 - correct pinctrl usage in dts Jisheng Zhang (6): pinctrl: berlin: regmap as an extra argument of berlin_pinctrl_probe() pinctrl: berlin: add the berlin4ct pinctrl driver arm64: berlin: add the pinctrl dependency for Marvell Berlin SoCs pinctrl: dt-binding: document berlin4ct SoC pinctrl arm64: dts: berlin4ct: add the pinctrl node arm64: dts: berlin4ct: add default pinmux for uart0 .../devicetree/bindings/pinctrl/berlin,pinctrl.txt | 5 +- arch/arm64/Kconfig.platforms | 1 + arch/arm64/boot/dts/marvell/berlin4ct.dtsi | 22 + drivers/pinctrl/berlin/Kconfig | 5 + drivers/pinctrl/berlin/Makefile | 1 + drivers/pinctrl/berlin/berlin-bg2.c | 10 +- drivers/pinctrl/berlin/berlin-bg2cd.c | 10 +- drivers/pinctrl/berlin/berlin-bg2q.c | 10 +- drivers/pinctrl/berlin/berlin.c | 9 +- drivers/pinctrl/berlin/berlin.h | 1 + drivers/pinctrl/berlin/berlin4ct.c | 503 +++++++++++++++++++++ 11 files changed, 565 insertions(+), 12 deletions(-) create mode 100644 drivers/pinctrl/berlin/berlin4ct.c -- 2.5.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
