Re: [PATCH v2 4/9] ARM: dts: Put Cygnus core components under core bus

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Friday 18 September 2015 14:24:09 Ray Jui wrote:
> 
> +       core {
> +               compatible = "simple-bus";
> +               ranges;
> +               #address-cells = <1>;
> +               #size-cells = <1>;
> +
> +               timer@19020200 {
> +                       compatible = "arm,cortex-a9-global-timer";
> +                       reg = <0x19020200 0x100>;
> +                       interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
> +                       clocks = <&periph_clk>;
> +               };
> +
> +               gic: interrupt-controller@19021000 {
> 

Could it be that all 'core' components are in the 0x19xxxxxx address range?
If so, please set up an appropriate ranges property for the bus. Also
add the address field for the bus according to which addresses are routed
to it.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux