[RFC v2 1/4] dt-bindings: drm/mediatek: Add Mediatek display subsystem dts binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




From: CK Hu <ck.hu@xxxxxxxxxxxx>

Add device tree binding documentation for the display subsystem in
Mediatek MT8173 SoCs.

Signed-off-by: CK Hu <ck.hu@xxxxxxxxxxxx>
Signed-off-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
---
 .../bindings/drm/mediatek/mediatek,disp.txt        | 131 +++++++++++++++++++++
 .../bindings/drm/mediatek/mediatek,dsi.txt         |  29 +++++
 2 files changed, 160 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/drm/mediatek/mediatek,disp.txt
 create mode 100644 Documentation/devicetree/bindings/drm/mediatek/mediatek,dsi.txt

diff --git a/Documentation/devicetree/bindings/drm/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/drm/mediatek/mediatek,disp.txt
new file mode 100644
index 0000000..a3811bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/drm/mediatek/mediatek,disp.txt
@@ -0,0 +1,131 @@
+Mediatek display subsystem
+==========================
+
+The Mediatek display subsystem consists of various DISP function blocks in the
+MMSYS register space. The connections between them can be configured by output
+and input selectors in the MMSYS_CONFIG register space and register updates can
+be synchronized to video frame boundaries with help of a DISP_MUTEX function
+block.
+
+The display-subsystem node binds together all individual device nodes that
+comprise the DISP subsystem.
+
+Required properties:
+
+- compatible: "mediatek,<chip>-disp"
+- components: Should contain a list of phandles pointing to the DISP function
+  block device nodes.
+- component-names: Should contain the name of the function block pointed to
+  by the components phandle of the same index.
+- mmsys-config: Should contain a phandle pointing to the MMSYS node.
+- disp-mutex: Should contain a phandle pointing to the DISP_MUTEX node.
+
+Example:
+
+display-subsystem {
+	compatible = "mediatek,mt8173-disp";
+	components = <&ovl0>, <&rdma0>, <&color0>, <&aal>,
+		     <&ufoe>, <&dsi0>, <&od>;
+	component-names = "ovl0", "rdma0", "color0", "aal",
+			  "ufoe", "dsi0", "od";
+	mmsys-config = <&mmsys>;
+	disp-mutex = <&mutex>;
+};
+
+DISP function blocks
+====================
+
+A display stream starts at a source function block that reads pixel data from
+memory and ends with a sink function block that drives pixels on a display
+interface, or writes pixels back to memory. All DISP function blocks have
+their own register space, interrupt, and clock gate. The blocks that can
+access memory additionally have to list the IOMMU and local arbiter they are
+connected to.
+
+For a description of the display interface sink function blocks, see
+Documentation/devicetree/bindings/drm/mediatek/mediatek,dsi.txt
+
+Required properties (all function blocks):
+- compatible: "mediatek,<chip>-disp-<function>", one of
+	"mediatek,<chip>-disp-ovl"   - overlay (4 layers, blending, csc)
+	"mediatek,<chip>-disp-rdma"  - read DMA / line buffer
+	"mediatek,<chip>-disp-color" - color processor
+	"mediatek,<chip>-disp-aal"   - adaptive ambient light controller
+	"mediatek,<chip>-disp-gamma" - gamma correction
+	"mediatek,<chip>-disp-ufoe"  - data compression engine
+	"mediatek,<chip>-disp-mutex" - display mutex
+	"mediatek,<chip>-disp-od"    - overdrive
+- reg: Physical base address and length of the function block register space
+- interrupts: The interrupt signal from the function block.
+- clocks: device clocks
+  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
+- compatible: "mediatek,<chip>-ddp"
+- power-domains: a phandle to DDP power domain node.
+
+Required properties (DMA function blocks):
+- compatible: Should be one of
+	"mediatek,<chip>-disp-ovl"
+	"mediatek,<chip>-disp-rdma"
+- larb: Should a phandles pointing to the local arbiter device as defined in
+  Documentation/devicetree/bindings/soc/mediatek/mediatek,smi-larb.txt
+- iommus: required a iommu node
+
+Examples:
+
+ovl0: ovl@1400c000 {
+	compatible = "mediatek,mt8173-disp-ovl";
+	reg = <0 0x1400c000 0 0x1000>;
+	interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>;
+	clocks = <&mmsys CLK_MM_DISP_OVL0>;
+	iommus = <&iommu M4U_LARB0_ID M4U_PORT_DISP_OVL0>;
+};
+
+rdma0: rdma@1400e000 {
+	compatible = "mediatek,mt8173-disp-rdma";
+	reg = <0 0x1400e000 0 0x1000>;
+	interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>;
+	clocks = <&mmsys CLK_MM_DISP_RDMA0>;
+	iommus = <&iommu M4U_LARB0_ID M4U_PORT_DISP_RDMA0>;
+};
+
+color0: color@14013000 {
+	compatible = "mediatek,mt8173-disp-color";
+	reg = <0 0x14013000 0 0x1000>;
+	interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_LOW>;
+	clocks = <&mmsys CLK_MM_DISP_COLOR0>;
+};
+
+aal: aal@14015000 {
+	compatible = "mediatek,mt8173-disp-aal";
+	reg = <0 0x14015000 0 0x1000>;
+	interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>;
+	clocks = <&mmsys CLK_MM_DISP_AAL>;
+};
+
+gamma: gamma@14016000 {
+	compatible = "mediatek,mt8173-disp-gamma";
+	reg = <0 0x14016000 0 0x1000>;
+	interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_LOW>;
+	clocks = <&mmsys CLK_MM_DISP_GAMMA>;
+};
+
+ufoe: ufoe@1401a000 {
+	compatible = "mediatek,mt8173-disp-ufoe";
+	reg = <0 0x1401a000 0 0x1000>;
+	interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>;
+	clocks = <&mmsys CLK_MM_DISP_UFOE>;
+};
+
+mutex: mutex@14020000 {
+	compatible = "mediatek,mt8173-disp-mutex";
+	reg = <0 0x14020000 0 0x1000>;
+	interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>;
+	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+	clocks = <&mmsys CLK_MM_MUTEX_32K>;
+};
+
+od: od@14023000 {
+	compatible = "mediatek,mt8173-disp-od";
+	reg = <0 0x14023000 0 0x1000>;
+	clocks = <&mmsys CLK_MM_DISP_OD>;
+};
diff --git a/Documentation/devicetree/bindings/drm/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/drm/mediatek/mediatek,dsi.txt
new file mode 100644
index 0000000..e892ef1
--- /dev/null
+++ b/Documentation/devicetree/bindings/drm/mediatek/mediatek,dsi.txt
@@ -0,0 +1,29 @@
+Mediatek DSI Device
+===================
+
+The Mediatek DSI function block is a sink of the display subsystem and can
+drive up to 4-lane MIPI DSI output. Two DSIs can be synchronized for dual-
+channel output.
+
+Required properties:
+- compatible: "mediatek,<chip>-dsi"
+- reg: Physical base address and length of the controller's registers
+- clocks: device clocks
+  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
+- clock-names: must contain "engine" and "digital".
+
+Example:
+
+dsi0: dsi@1401b000 {
+	compatible = "mediatek,mt8173-dsi";
+	reg = <0 0x1401b000 0 0x1000>,	/* DSI0 */
+	      <0 0x10215000 0 0x1000>;  /* MIPI_TX0 */
+	clocks = <&mmsys MM_DSI0_ENGINE>, <&mmsys MM_DSI0_DIGITAL>;
+	clock-names = "engine", "digital";
+
+	port {
+		dsi0_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
-- 
2.5.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux